Twitter

Facebook

Instagram

317L Round Bar

EN26 Round Bar

Table of Content

En26 Alloy Steel,Heat Treated bars of En26,EN 26 Round Bar supplier,EN26 Bright Bars,EN 26 Forged Round Bar Suppliers,EN26 Blocks,EN 26 Billets

EN26 Round Bars,Stockist & Supplier of EN26 Round Bars, IS 5517-1993 40Ni10Cr3Mo6 Bars, DIN 1.6745, BS 970 EN26,Buy En26 Carbon Steel Round Bar, Alloy Steel En26t Black  Round Bar, 4340 En26 Forged Steel Flat Round Bar Stock At Factory Price In Mumbai, India

    Tronixalloy.com offers EN 26 Round Bar. There are two types of round bars available: bright bars and hot rolled bars. Usually used in the aerospace and defence industries for gears and shafts, EN 26 Round Bar is a high tensile alloy steel. We are one of the largest and most trusted suppliers of EN 26 Round Bar in India.

    EN 26 Round Bar can also be supplied quenched and tempered, annealed, or in any other condition required by our customers. Standard lengths of these bars are available, as well as cut lengths based on the size required by the consumer. Tronixalloy.com is a Round Bar supplier in Mumbai and other cities. Tronixalloy.com also supplies En26w 826M40 Hardening steel as round bars and blocks.

    Tronixalloy.com manufactures forged blocks and flats. En26 steel round bars and forged blocks are available in tempered condition from us. There are many sizes of En26 round and flat in stock. En26 steel bars and rods are also available in billet form for forging en26 circles.

    In terms of steel grades, EN 26 is a low-alloy steel grade with chromium and molybdenum contents. It is also known as 826M40 in the United Kingdom and AISI 8740 in the United States. An EN 26 round bar is a cylindrical metal rod made out of this steel grade that has a diameter of 26 millimeters and is manufactured using the EN 26 steel grade.

    Usually, EN 26 steel is used in applications that require high tensile strength, such as aircraft landing gear, shafts, and gears, in which high tensile strength is required. As a result of its good wear resistance, toughness, and hardenability, it is suitable for use in environments under high levels of stress, such as industrial environments.

    The steel round bar EN 26 can be machined and welded using conventional methods, and it can also be heat-treated in order to achieve different levels of strength and hardness. In most cases, the material is supplied in the annealed or normalized condition, however it can also be supplied in the hardened and tempered condition.

    I believe that EN 26 round bars are a versatile and reliable material that is widely used in a number of industrial applications that require a high degree of strength and durability.

    Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Specification EN 26 Round Bar

    Grade

    EN26 Round Bar

    Carbon Steel EN 26 Round Bar size

    4 to 100mm

    CS En-26 Hollow Bar

    32mm OD x 16mm ID to 250mm OD x 200mm ID)

    En-26 Carbon Steel Hex Bar size

    2-100mm A/F

    Carbon Steel En-26 Angle bar size

    3mm*20mm*20mm~12mm*100mm*100mm

    CS En-26 Rectangles Size

    33 x 30mm to 295 x 1066mm

    En-26 Carbon Steel Flat bar size

    Thickness: 2 -100mm

    Width: 10 to 500mm

    Carbon Steel En-26 Channel Bar

    80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness

    CS En-26 Section

    3.0 to 12.0mm thickness

    En-26 Carbon Steel Round bar size

    Diameter: 3-~800mm

    Carbon Steel En-26 Billet Size

    1/2″ to 495mm Diameter

    CS En-26 Round Bar Standard Dimensions 

    Diameter / Height:

    Carbon Steel En-26 Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches.

    Carbon Steel En-26 Surface

    Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

    CS En-26 Tolerance

    H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

    En-26 Carbon Steel Technique

    Carbon Steel En-26 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

    Carbon Steel En-26 Condition

    Hardened & tempered, annealed

    Finish

    Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

    Form

    Carbon Steel En-26 Round, Rod, T-Bar, En-26 Channel Bar, Precision Ground Bar, En-26 Flat Bar, En-26 Square Bar, En-26 Blocks, En-26 Round Rod, En-26 Rings, En-26 Hollow, Triangle, Rectangle, Hex (A/F), En-26 Threaded, Half Round Bar, Profiles, En-26 Billet, En-26 Ingot, I/H Bar, Forging etc.

    Processing

    Bar cutting to 650mm

    Our Carbon Steel En-26 Round bar conforms to NACE MR0175/ISO 15156

     

    EN 26 Round Bar Chemical Compositions :

    Grade – EN26 / 40Ni10Cr3Mo6

    Elements

    Min.

    Max.

    C

    0.36

    0.44

    Mn

    0.40

    0.70

    Si

    0.10

    0.35

    Ni

    2.25

    2.75

    Cr

    0.50

    0.80

    Mo

    0.40

    0.70

    S

    0.035

    P

    0.035

     

    Mechanical & Physical Properties Of EN 26 Round Bar

    U

    V

    W

    X

    Y

    Z

    Ruling Section (mm)

    150

    150

    150

    100

    100

    100

    Tensile Strength (MPa)

    930/1080

    1000/1160

    1080/1240

    1235 (Min)

    1540 (Min)

    1540 (Min)

    Yield Stress (MPa)

    740

    835

    925

    1005

    1130

    1130

    Elongation (% Min)

    17

    14

    13

    14

    14

    10

    ISO V Impact (Joule)

    47.5

    47.5

    40.7

    34

    34

    14

    Hardness (Brinell)

    269/321

    293/341

    311/375

    341/388

    363/415

    444 (Min)

    Proof Stress (0.2%) if required (Mpa, Min)

    710

    770

    850

    910

    990

    1235

     

    EN26 Round Bar Features

    • Great oxidation resistance
    • No rust or stain
    • Can work at cryogenic temperatures
    • Strength retention at room temperature
    • Have good toughness at -450° F

    EN26 Round Bar Standard Size 

    Type SIZES (mm) SIZES (Inches) ISO Tolerance
    Cold Drawn and Ground 10.00 – 75.00 5/6″ – 2.50″ h8-h9-h10-h11
    Peeled and Polished 40.00 – 150.00 1.50″ – 6.00″ h11, h11-DIN 1013
    Peeled and Ground 20.00 – 50.00 3/4″ – 2.00″ h9-h10-h11
    Cold Drawn and Polish 3.00 – 75.00 1/8″ – 3.00″ h8-h9-h10-h11

     

    En-26 Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

    5.0

    45.0
    6.0 50.0
    7.0 55.0
    8.0 60.0
    9.0 65.0
    10.0 70.0
    12.0 75.0
    16.0 80.0
    20.0 90.0
    25.0 100.0
    30.0 130.0
    35.0 160.0
    40.0 200.0
    • SW 13  En-26 Round Bar
    • SW 17  En-26 Round Bar
    • SW 19 En-26 Round Bar
    • SW 24 En-26 Round Bar
    • SW 27 En-26 Round Bar

    Process: EAF+LF+VOD+ Forged+Heat Treatment

    SIZE RANGE:

    Round:

    Hot Forged: 80mm-1200mm

    Forging of EN26 Round Bars :

    As soon as the temperature reaches 1150°C – 1200°C, forge and hold until the temperature is uniform throughout. At 850°C or higher, forge. Workpieces should be cooled slowly in sand or dry lime after forging.

    Machining of EN26 Round Bars :

    EN26 in the hardened and tempered as supplied condition is still regarded as being readily machinable and operations such as turning and drilling etc. can be carried out satisfactorily using machine manufacturers, recommendations for suitable tool type – feeds and speeds.

    Welding of EN26 Round Bars :

    Welding of EN26 in the hardened and tempered condition (as normally supplied), is not recommended and should be avoided if at all possible, as the mechanical properties will be altered within the weld heat affected zone. It is preferred that welding be carried out on EN26 while in the annealed condition, and that the work piece, immediately on cooling to hand warm, is then stress relieved at 640°C – 660°C prior to hardening and tempering. If welding in the hardened and tempered condition is really necessary, then the workpiece, immediately on cooling to hand warm, should be stress relieved at 15°C below the original tempering temperature.

    Ultrasonic test:

    According to SEP 1921-84 3Cc

    Forging:

    Heat to 1150 to 1200°C and hold at temperature until thoroughly soaked and suitable to forge. Do not forge below 850°C.

    Heat Treatment:

    To harden EN26 first heat the component to 820 to 850°C and hold at temperature until thoroughly soaked. Quench the EN26 component in oil, water or polymer as required. EN26 can be flame or induction hardened to achieve a high surface hardness.

    Tempering

    To temper EN26, heat the component to the required tempering temperature (450 to 660°C), thoroughly soak for 1 hour per 25mm thickness of section, cool in air.

    Nitriding

    EN26 can be nitrided to give a surface hardness of up to 60HRc. Heat to 500 to 530°C and hold for sufficient time to develop the case depth required, no quenching is required.

    Stress Relieving

    To stress relieve EN26, heat the component to 640 to 660°C and hold until temperature is uniform through the section. Soak the EN26 component for 1 hour per 25mm thickness of section and cool in air.

    Typical applications of EN 26 Round Bar :

    • Undercarriages
    • Aero-engine and airframe parts
    • Heavy duty gears
    • Pinion connecting rods
    • Crank and differential shafts and other transmission parts
    • High strength bolts and studs
    • Electrical motor shafts
    • Turbine discs
    • Gas bottles
    • Mandrel bars for tube manufacture
    • Ordnance parts

    EN 26 Round Bar Application Industry

    • Aircraft exhaust manifolds
    • Bellows
    • construction materials
    • Furnace parts
    • Chemical containers, including for transport
    • Heating element tubing
    • Architectural applications
    • Woven or welded screens for high temperature mineral processing
    • Spiral Welded tube for burner pipes and flues
    • Heat Exchangers
    • Expansion joints

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us