Twitter

Facebook

Instagram

317L Round Bar

904L stainless steel round bar

Table of Content

Suppliers and dealers of stainless steel 904L bars, stainless steel 904L round bars, stainless steel UNS N08904 bright bars, stainless steel 904L hollow bars, and austenitic stainless steel 904L rods in Mumbai, India.

In India, we offer Stainless Steel 904L Round Bars, ASTM A479 Stainless Steel 904L Hex Bars, Stainless Steel 904L Forged Bars, Stainless Steel 904L Square Bars, Stainless Steel WERKSTOFF NR. 1.4539 Round Bars.

    Due to their high carbon content, these SS Cross Pipe Fittings have a lower melting point and are more temperature resistant. SS Butt Weld Equal Tees fit the pipe’s diameter and are easy to install, requiring less maintenance. The excellent properties of this product also prevent it from decaying when it comes into contact with moisture.

     We specialize in providing best-in-class SS 904L Seamless Buttweld Fitting to the oil, gas, and chemical industries. Our SS 904L welded buttweld fittings are also made using the method of the big mitered joint, where the fillings are cut to the correct angle and welded together to achieve the required change.

    The main constituent of stainless steel is chromium, in quantities of about 10.5-11%. Buttweld fittings made of stainless steel have numerous benefits, including anti-corrosion features, resistance to acidic environments, better machinability, and workability. Tronixalloy.com manufactures SS Buttweld Pipe Fittings from the best grades of stainless steel, including 317L, 321H, 347H, 316Ti, and 310.

     The oil, gas, and chemicals industries rely on us for best-in-class SS 904L Seamless Buttweld Fittings. With their high carbon content, these SS Cross Pipe Fittings can lower their melting point and enhance their temperature resistance. With the same diameter as the pipe, SS Butt Weld Equal Tees are easy to install and require little maintenance. The excellent properties of this product prevent it from decaying when exposed to moisture. Our SS 904L Welded Butt Weld Fitting is also created with the big mitered joint method, where the fillings are cut to the right angle and welded together to achieve the required change. A stainless steel alloy contains about 10.5-11% chromium.

     You will benefit from numerous advantages by fabricating buttweld fittings with SS, including anti-corrosion properties, resistance to acidic environments, and better machinability and workability. At Tronix Alloy, we manufacture stainless steel buttweld pipe fittings made from 317L, 321H, 347H, 316Ti, and 310 grades. Due to their high carbon content, SS Cross Pipe Fittings resist temperature changes and have a lower melting point.

     Our company supplies oil, gas, and chemicals industries with best-in-class SS 904L Seamless Buttweld Fittings. Equal Tees with SS Butt Welds have a similar diameter to the pipe and require less maintenance. In addition to its excellent properties, this product does not decay when exposed to moisture. As well as SS 904L Welded Butt Weld Fittings, we also supply SS 904L Welded Butt Weld Fittings created using a big mitered joint, where welded butts are cut to the correct angle and welded together to achieve the desired result.

    Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    904L stainless steel round bars specifications, sizes, and grades:

    The standard

    ANSI/ASTM

    The designation

    SB 649, Bill 649

    The grade

    Rods and bars in 904L

    Round bars and rods in 904L: ASTM B 649, ASME SB 649

     

    EN/DIN

    1.4539 

    X1NiCrMoCu25-20-5

    AFNOR

    Z2CNDU25.20

    UNS

    N08904

    AISI

    904L / F904L

    BS

    904S13

    SS

    2562

    OTHER

    ASTM A182 

    ASTM A262 

    ASTM A479 

    ASTM B649 / ASME SB649 

    DIN 17440 

    EN10088-3 

    EN10272 

    NACE MR01-75 / ISO 15156 

    SEW 400-VdTÜV421

    BRANDS

    URANUS B6™ 

    VLX904™ 

    AL-904L™ 

    CONIFER 1925™ 

    2RK65™

     

    Grade

    SS 904L – UNS N08904

    Specification

    ASTM A276 UNS N08904, WS 1.4539, AFNOR Z2CNDU 25-20

    Round bar size

    Diameter: 3-~800mm

    Hex Bar size

    2-100mm A/F

    Flat bar size

    Thickness: 2 -100mm

    Width: 10 to 500mm

    Square bar size

    4 to 100mm

    Angle bar size

    3mm*20mm*20mm~12mm*100mm*100mm

    Section

    3.0 to 12.0mm thickness

    Channel Bar

    80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness

    Hollow Bar

    32mm OD x 16mm ID to 250mm OD x 904Lmm ID)

    Billet Size

    1/2″ to 495mm Diameter

    Rectangles Size

    33 x 30mm to 295 x 1066mm

    Round Bar Standard Dimensions 

    The diameter and height of the product are as follows:

    Finish

    It is cold (bright) drawn, centerless ground, smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, rough turned, bright, polished, ground, centreless ground, and blackened.

    Tolerance

    A8, A9, A10, A11, A12, A13, A14 or as per client’s request

    Surface

    Hot Rolled Pickled, Cold Drawn, Sand Blasted Finished, Polished, Hairline

    Condition

    Anodized, hardened, and tempered

    Technique

    Stainless Steel 904L Round Bar, Rod, Forged, Hot Rolled, Cold Drawn, Cold Rolled

    Processing

    Cutting of bars to 650mm

    Form

    Welding Rod, Round Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging, etc. made from stainless steel 904L.

    For fast delivery across India, we have a stockyard location

    in Coimbatore, Bhubaneswar, Ahmedabad, Bengaluru, Thiruvananthapuram, Agra, Chennai, Noida, Mumbai, Shivamogga, Dhanbad, Hyderabad, Tiruchirappalli, Tirunelveli, Pune, Pimpri-Chinchwad, Navi Mumbai

    Stainless Steel 904L Round Bar conforms to NACE MR0175/ISO 15156

     

     

    Mechanical properties of stainless steel 904L rods

    Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
    7.95 g/cm3 1350 °C (2460 °F) Psi – 71000, MPa – 490 Psi – 32000, MPa – 220 35%

    Chemical composition of 904L stainless steel round bars

    Grade C Mn Si P S Cr Mo Ni Cu
    Stainless Steel 904L 0.020 max 2 maxes 1 max 0.040 max 0.030 max 19.0-23.0 4.0-5.0 max 23.00 – 28.00 1.0-2.0

    Surface finish for 904L Round Bar

    CD Drawn cold P Finished
    BD Brightly colored SRE Edge rolled with a slit
    CG Ground with no center HF The hot finish
    CF The cold finish HRAP Annealed and pickled hot rolled steel
    P&T Turned and peeled RT Peeled/rough turned
    ST A smooth turn PR Reel-peeled

    904L Rod Condition

    H&T

    In a hardened and tempered state.

    ANN

    It is annealed

    PH.

    It hardened as it rained.

     

    Similar to:

    AL6XN® / AL6XN Plus®

    UNS NO8367

    254SMO® / 6Mo® / 6 Moly

    1.4529

    STAINLESS STEEL ROUND BAR CHEMICAL COMPOSITION 904L

    Because of the very low price, you can check the chemical composition of SS 904L round bars in the table below

    Chemical composition of 904L stainless steel round bars

    Grade

    C

    Mn

    Si

    P

    S

    Cr

    Mo

    Ni

    Cu

    Stainless Steel 904L

    0.020 max

    2 maxes

    1 max

    0.040 max

    0.030 max

    19.0-23.0

    4.0-5.0 max

    23.00 – 28.00

    1.0-2.0

    MECHANICAL PROPERTIES OF A 904L STAINLESS STEEL BAR

    The following table shows the properties of the material we are supplying for 904L SS True Bars & 904L SS Hex Bars

    Mechanical properties of stainless steel 904L rods

    Density

    Melting Point

    Tensile Strength

    Yield Strength (0.2%Offset)

    Elongation

    7.95 g/cm3

    1350 °C (2460 °F)

    Psi – 71000, MPa – 490

    Psi – 32000, MPa – 220

    35%

    ROUND BARS Made from 904L SS IN EQUIVALENT GRADES

    A wide range of AISI 904L Equivalent Indian Standards are available from us

    STANDARD

    WERKSTOFF NR.

    UNS

    JIS

    BS

    KS

    AFNOR

    EN

    Stainless Steel 904L

    1.4539

    N08904

    SUS 904L

    904S13

    STS 317J5L

    Z2 NCDU 25-20

    X1NiCrMoCu25-20-5

    Round Bar A479 904l Physical Properties

    The physical properties of 904l stainless steel after annealing

    Properties

    Metric

    Imperial

    Density

    7.7 ” 8.03 g/cm3

    0.278 ” 0.290 lb/in³

    STOCK OF ASTM A276 AND AISI 904L BARS

    We are one of the largest stockists and suppliers of 904l Bar Stock in India and are strategically located to serve anywhere in the country:

    Tronix Alloy stocks the widest variety of 904l Round Bar Stock in India for 904l stainless steel round bars.

    Polished flat bar SUS904l

    Hex bar made of stainless steel 904l

    Hexagonal bars made of stainless steel 904l

    Hex bar type 904l according to ASTM A276

    Stainless steel bright bar 904l

    Bright Bar AISI 904L ASTM A276

    Bright Bar 904L in stainless steel

    Bright bars made from stainless steel 904l rolled

    Bright bar ASTM A276 Type 904l

    Hex bar made from stainless steel 904l

    Rectangular bars made of 904L stainless steel

    Rectangular steel bar SUS904l

    Stainless steel rectangular bar 904L

    904L Rectangular Bar in Stainless Steel

    904l Rectangular Bar in Rolled Stainless Steel

    Type 904l Rectangular Bars according to ASTM A276

    Stainless steel square bar 904l

    Square Steel Bar SUS904L

    904L stainless steel square bar

    Square 904L stainless steel bar

    Shaft made of 904L stainless steel

    Forged stainless steel rod 904l

    The 904L square bar is rolled stainless steel

    Type 904l square bar according to ASTM A276

    Flat bars made of 904L stainless steel

    904L stainless steel flat bar

    Polished stainless steel 904l bar

    Polished 904l stainless steel bar

    Polished 904l stainless steel bars

    Type 904l Polished Bar ASTM A276

    Rods made of 904l stainless steel

    Bars with SUS904l threads

    Stainless steel 904l flat bar rolled

    Type 904l flat bar according to ASTM A276

    Stainless steel polished bar 904l

    Polished bar SUS904l

    Threaded bars made from stainless steel 904l

    Threaded 904l stainless steel bar

    The 904l T-bar is made of stainless steel

    T-bar for SUS904l

    T-bars made from stainless steel 904l

    904L stainless steel rods

    Threaded bars made from stainless steel 904l rolled

    Type 904l Forged Bars as per ASTM A276

    Hollow 904l stainless steel bars

    Hollow bars of Type 904l in accordance with ASTM A276

    The cold rolled bar is made of stainless steel 904l

    Stainless steel hex bar 904l

    Flat bars with rolled edges in accordance with ASTM A276 Type 904l

    Rods made of 904L stainless steel

    Cold Rolled Bars ASTM A276 Type 904l

    Hollow bars made of 904l stainless steel

    Precision ground 904l stainless steel

    Round stock made from stainless steel 904l

    Rounds of stainless steel 904l

    Rounds made of SUS904l

    Rounds of ASTM A276 Type 904l

    Polished flat bar made of 904l stainless steel

    Hollow SUS904l Bar

    904L stainless steel springs

    Rod made of stainless steel 904l

    Rod made from stainless steel 904l

    Rods made of 904l stainless steel hot rolled

    Type 904l rod in accordance with ASTM A276

    A black bar made of stainless steel 904l

    Black bar made from 904L stainless steel

    Type 904l Precision Ground Bar in accordance with ASTM A276

    Triangle bar made of stainless steel 904L

    Triangle bar made of SUS904l

    Bright Bars made of Stainless Steel 904L

    A flat bar with a rolled edge made of SUS904l

    Bars made from stainless steel 904l

    Stainless steel half-round bar 904L

    Half rounds in accordance with ASTM A276 Type 904l

    Stainless steel threaded rod 904l

    Ground bar made of SUS904l precision

    A precision ground bar made of stainless steel 904l

    Hex bar made of 904l stainless steel

    Bright bar made of 904l stainless steel

    Bars made of hot rolled stainless steel ASTM A276 Type 904l

    Type 904l Blooms according to ASTM A276

    Blooms made of 904l stainless steel

    Stainless steel 904L round corner square bar

    Hollow ring bar Type 904l as per ASTM A276

    Circular bars made from 904l stainless steel

    Round Corner Square Bar Type 904l ASTM A276

    Hexagonal rods made of 904l stainless steel

    Hollow rods of ASTM A276 Type 904l

    Billets of ASTM A276 Type 904l

    Billets made of stainless steel 904l

    Hollow ring bar made of 904l stainless steel

    Type 904l Circular Bar, ASTM A276

    Hollow rods made from 904l stainless steel

    Type 904l hexagonal rods according to ASTM A276

    Stainless Steel 904l Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed round bars manufacturer and exporter in India.

    • Cold Rolled 904l Stainless Steel Bars
    • Bars made of stainless steel 904l
    • Forged bars made of 904l stainless steel
    • Black 904L stainless steel bar
    • Quenched and tempered stainless steel 904l bars
    • Hot rolled 904l stainless steel bars
    • Continuous cast 904L stainless steel bar
    • Normalized 904l stainless steel bars
    • Bright bars made of stainless steel 904l
    • 904L stainless steel annealed bar
    • Peeled 904L stainless steel bar
    • Hardened & Tempered 904L Stainless Steel Bar
    • Grinded and machined stainless steel bars 904l

    SIZES OF STAINLESS STEEL 904L HOLLOW BARS

    Stainless Steel904l Hollow Bar Size Chucked true to OD Chucked true to ID

    OD,

    mm

    ID,

    mm

    Max. OD,

    mm

    Min. ID,

    mm

    Max. OD,

    in.

    Min. ID,

    in.

    Max. OD,

    mm

    Min. ID,

    mm

    Max. OD,

    in.

    Min. ID,

    in.

    32 20 31 21.9 1.220 0.862 30 21 1.185 0.827
    32 16 31 18 1.220 0.709 30 17 1.181 0.669
    36 25 35 26.9 1.378 1.059 34.1 26 1.343 1.024
    36 20 35 22 1.378 0.866 34 21 1.339 0.827
    36 16 35 18.1 1.378 0.713 33.9 17 1.335 0.669
    40 28 39 29.9 1.535 1.177 38.1 29 1.500 1.142
    40 25 39 27 1.535 1.063 38 26 1.496 1.024
    40 20 39 22.1 1.535 0.870 37.9 21 1.492 0.827
    45 32 44 33.9 1.732 1.335 43.1 33 1.697 1.299
    45 28 44 30 1.732 1.181 43 29 1.693 1.142
    45 20 44 22.2 1.732 0.874 42.8 21 1.685 0.827
    50 36 49 38 1.929 1.496 48 37 1.890 1.457
    50 32 49 34.1 1.929 1.343 47.9 33 1.886 1.299
    50 25 49 27.2 1.929 1.071 47.8 26 1.882 1.024
    56 40 55 42 2.165 1.654 54 41 2.126 1.614
    56 36 55 38.1 2.165 1.500 53.9 37 2.122 1.457
    56 28 55 30.3 2.165 1.193 53.7 29 2.114 1.142
    63 50 62 51.9 2.441 2.043 61.1 51 2.406 2.008
    63 45 62 47 2.441 1.850 61 46 2.402 1.811
    63 40 62 42.2 2.441 1.661 60.8 41 2.394 1.614
    63 36 62 38.3 2.441 1.508 60.7 37 2.390 1.457
    63 32 62 34.4 2.441 1.354 60.6 33 2.386 1.299
    71 56 69.9 58 2.752 2.283 68.9 57 2.713 2.244
    71 45 69.9 47.3 2.752 1.862 68.6 46 2.701 1.811
    71 40 69.9 42.4 2.752 1.669 68.5 41 2.697 1.614
    71 36 69.9 38.5 2.752 1.516 68.4 37 2.693 1.457
    75 60 73.8 62 2.906 2.441 72.8 61 2.866 2.402
    75 50 73.8 52.2 2.906 2.055 72.6 51 2.858 2.008
    75 40 73.8 42.5 2.906 1.673 72.3 41 2.846 1.614
    80 63 78.8 65 3.102 2.559 77.8 64 3.063 2.520
    80 50 78.8 52.4 3.102 2.053 77.4 51 3.047 2.008
    80 45 78.8 47.5 3.102 1.870 77.3 46 3.043 1.811
    80 40 78.8 42.6 3.102 1.677 77.2 41 3.039 1.614
    85 67 83.7 69.1 3.295 2.720 82.6 68 3.252 2.677
    85 55 83.7 57.4 3.295 2.260 82.3 56.0 3.240 2.205
    85 45 83.7 47.6 3.295 1.874 82.1 46.0 3.232 1.811
    90 71 88.6 73.1 3.488 2.878 87.6 72.1 3.449 2.839
    90 63 88.6 65.3 3.488 2.571 87.3 64.0 3.437 2.520
    90 56 88.6 58.5 3.488 2.303 87.1 57.0 3.429 2.244
    90 50 88.6 52.6 3.488 2.071 87.0 51.0 3.425 2.008
    95 75 93.5 77.3 3.681 3.041 92.4 76.2 3.641 2.997
    95 67 93.5 69.3 3.681 2.728 92.2 68.0 3.630 2.677
    95 50 93.5 52.7 3.681 2.075 91.8 51.0 3.614 2.008
    100 80 98.5 82.3 3.878 3.240 97.4 81.2 3.835 3.197
    100 71 98.5 73.4 3.878 2.890 97.2 72.1 3.827 2.839
    100 63 98.5 65.5 3.878 2.579 97.0 64.0 3.819 2.520
    100 56 98.5 58.7 3.878 2.311 96.8 57.0 3.811 2.244
    106 80 104.4 82.5 4.110 3.248 103.1 81.2 4.059 3.197
    106 71 104.4 73.5 4.110 2.894 103.0 72.1 4.055 2.839
    106 63 104.4 65.7 4.110 2.587 102.7 64.0 4.043 2.520
    106 56 104.4 58.9 4.110 2.319 102.5 57.0 4.035 2.244
    112 90 110.3 92.5 4.343 3.642 109.2 91.4 4.299 3.598
    112 80 110.3 82.6 4.343 3.252 108.9 81.2 4.287 3.197
    112 71 110.3 73.7 4.343 2.902 108.7 72.1 4.280 2.839
    112 63 110.3 65.8 4.343 2.591 108.5 64.0 4.272 2.520
    118 90 116.2 92.7 4.575 3.650 114.9 91.4 4.524 3.598
    118 80 116.2 82.8 4.575 3.260 114.6 81.2 4.512 3.197
    118 71 116.2 73.8 4.575 2.906 114.5 72.1 4.508 2.839
    118 63 116.2 66.0 4.575 2.598 114.2 64.0 4.496 2.520
    125 100 123.1 102.7 4.846 4.043 121.9 101.5 4.799 3.996
    125 90 123.1 92.8 4.846 3.654 121.7 91.4 4.791 3.598
    125 80 123.1 82.9 4.846 3.264 121.4 81.2 4.780 3.197
    125 71 123.1 74.0 4.846 2.913 121.3 72.1 4.772 2.839
    132 106 130.0 108.8 5.118 4.283 128.8 107.6 5.071 4.236
    132 90 130.0 93.0 5.118 3.661 128.4 91.4 5.055 3.598
    132 80 130.0 83.1 5.118 3.272 128.1 81.2 5.043 3.197
    132 71 130.0 74.2 5.118 2.921 121.2 72.1 5.035 2.839
    140 112 137.9 115 5.429 4.528 136.6 113.7 5.378 4.476
    140 100 137.9 103.1 5.429 4.059 136.3 101.5 5.366 3.996
    140 90 137.9 93.2 5.429 3.669 136.1 91.4 5.358 3.598
    140 80 137.9 83.3 5.429 3.280 135.8 81.2 5.346 3.197
    150 125 147.7 128.1 5.815 5.043 146.5 126.9 5.768 4.996
    150 106 147.7 109.3 5.815 4.303 146 107.6 5.748 4.236
    150 95 147.7 98.4 5.815 3.874 145.7 96.4 5.736 3.795
    150 80 147.7 83.6 5.815 3.291 145.3 81.2 5.720 3.197
    160 132 157.6 135.3 6.205 5.327 156.3 134 6.154 5.276
    160 122 157.6 125.4 6.205 4.937 156 123.8 6.142 4.874
    160 112 157.6 115.5 6.205 4.547 155.8 113.7 6.134 4.476
    160 90 157.6 94.0 6.205 3.701 155.2 91.4 6.110 3.598
    170 140 167.4 143.5 6.591 5.650 166 142.1 6.535 5.594
    170 130 167.4 133.6 6.591 5.260 165.8 132 6.528 5.197
    170 128 167.4 131.6 6.591 5.181 165.7 130 6.524 5.118
    170 118 167.4 121.7 6.591 4.791 165.5 119.8 6.516 4.717
    170 106 167.4 109.8 6.591 4.323 165.2 107.6 6.504 4.236
    170 100 167.4 103.9 6.591 4.091 165 101.5 6.496 3.996
    180 150 177.3 153.6 6.980 6.047 176 152.3 6.929 5.996
    180 140 177.3 143.7 6.980 5.657 175.7 142.1 6.917 5.594
    180 125 177.3 128.9 6.980 5.075 175.3 126.9 6.902 4.996
    180 100 177.3 104.1 6.980 4.098 174.7 101.5 6.878 3.996
    190 160 187.1 163.8 7.366 6.449 185.7 162.4 7.311 6.394
    190 150 187.1 153.9 7.366 6.059 185.5 152.3 7.303 5.996
    190 132 187.1 136 7.366 5.354 185.1 134 7.287 5.276
    200 170 197.0 173.9 7.756 6.846 195.6 172.6 7.701 6.795
    200 160 197.0 164 7.756 6.457 195.4 162.4 7.693 6.394
    200 150 197.0 154.1 7.756 6.067 195.2 152.3 7.685 5.996
    200 140 197.0 144.2 7.756 5.677 194.9 142.1 7.673 5.594
    212 170 208.8 174.2 8.220 6.858 207.2 172.6 8.157 6.795
    212 150 208.8 154.4 8.220 6.079 206.6 152.3 8.133 5.997
    212 130 208.8 134.6 8.220 5.299 206.2 132 8.118 5.197
    224 180 220.6 184.4 8.685 7.260 218.9 182.7 8.618 7.193
    224 140 220.6 144.8 8.685 5.701 217.9 142.1 8.579 5.594
    236 190 232.4 194.6 9.150 7.661 230.7 192.9 9.083 7.594
    236 150 232.4 155.0 9.150 6.102 229.7 152.3 9.043 5.996
    250 200 246.2 204.9 9.693 8.067 244.3 203.0 9.618 7.992
    275 200 268.9 205.4 10.587 8.087 266.5 203.0 10.492 7.992

    ROUND BAR SIZES IN 904L STAINLESS STEEL

    Type SIZES (mm) SIZES (Inches) ISO Tolerance
    Drawn and ground cold 10.00 – 75.00 5/6 – 2.50 h8-h9-h10-h11
    Polished and cold drawn 3.00 – 75.00 1/8 – 3.00 h8-h9-h10-h11
    Ground and peeled 20.00 – 50.00 3/4 – 2.00 h9-h10-h11
    Polished and peeled 40.00 – 150.00 1.50 – 6.00 h11, h11-DIN 1013

    Standard lengths of 904l stainless steel bars are 2000mm and 6000mm. We can cut to size on request (tolerance +2/-0 mm).

    5.0 45.0
    6.0 50.0
    7.0 55.0
    8.0 60.0
    9.0 65.0
    10.0 70.0
    12.0 75.0
    16.0 80.0
    20.0 90.0
    25.0 100.0
    30.0 130.0
    35.0 160.0
    40.0 200.0
      • Stainless steel hex rod SW 13 904l
      • Hex rod made of stainless steel 17 904l
      • Hex rod made from SW 19 904l stainless steel
      • Hex rod made of stainless steel SW 24 904l
      • Hex rod made of stainless steel SW 27 904l

      A variety of shapes are available from premium quality 904l stainless steel round bar suppliers, including round bars, square bars, hexagonal bars, flat bars, channels, and hollow bars.

    STANDARD SIZES OF STAINLESS STEEL 904L HEX BARS

    Size (mm) Weight (kg/m) Size (mm) Weight (kg/m) Size (mm) Weight (kg/m)
    7 x 7 0.337 19 x 19 2.479 38 x 38 9.916
    8 x 8 0.44 20 x 20 2.747 40 x 40 10.988
    9 x 9 0.556 21 x 21 3.029 42 x 42 12.114
    10 x 10 0.687 22 x 22 3.324 45 x 45 13.906
    11 x 11 0.831 24 x 24 3.956 48 x 48 15.822
    12 x 12 0.989 25 x 25 4.292 50 x 50 17.168
    13 x 13 1.161 26 x 26 4.642 53 x 53 19.29
    14 x 14 1.346 28 x 28 5.384 55 x 55 20.774
    15 x 15 1.545 30 x 30 6.181 60 x 60 24.723
    16 x 16 1.758 32 x 32 7.032 65 x 65 29.015
    17 x 17 1.985 34 x 34 7.939 70 x 70 33.65
    18 x 18 2.225 36 x 36 8.9 75 x 75 38.629

    SIZES OF 904L STAINLESS STEEL FLAT BARS

    Stainless Steel304 flat bar sizes in mm Stainless Steel304 Flat Bar Size (inch) Stainless Steel304 Flat Bar Thickness (mm) Stainless Steel304 Flat Bar Thickness (in Inches)
    22 7/8 17 & 18 2/3 – 5/7
    25 1 5 to 20 3/16 – 4/5
    30 1-3/16 5 to 20 3/16 – 4/5
    32 1-1/4 6 to 20 1/4 – 4/5
    35 1-3/8 5 to 20 3/16 – 3/16
    40 1-4/7 5 to 25 3/16 – 1
    45 1-7/9 5 to 25 3/16 – 1
    47 1-6/7 17,25 & 32 2/3, 1 & 1-1/4
    50 2 5 to 32 3/16 – 1-1/4
    Stainless Steel304 flat bar sizes in mm Stainless Steel304 Flat Bar Size (inch) Stainless Steel304 Flat Bar Thickness (mm) Stainless Steel304 Flat Bar Thickness (in Inches)
    22 7/8 17 & 18 2/3 – 5/7
    25 1 5 to 20 3/16 – 4/5
    30 1-3/16 5 to 20 3/16 – 4/5
    32 1-1/4 6 to 20 1/4 – 4/5
    35 1-3/8 5 to 20 3/16 – 3/16
    40 1-4/7 5 to 25 3/16 – 1
    45 1-7/9 5 to 25 3/16 – 1
    47 1-6/7 17,25 & 32 2/3, 1 & 1-1/4
    50 2 5 to 32 3/16 – 1-1/4
    55 2-1/16 5 to 25 3/16 – 1
    57 2-1/4 32 1-1/4
    60 2-3/8 5 to 35 3/16 – 1-3/8
    63 2-1/2 10 to 30 3/8 – 1-3/16
    65 2-5/9 10 to 30 & 35 3/8 – 1-3/16, & 1-3/8
    70 2-3/4 6 to 25 & 40 1/4 – 1, & 1-4/7
    75 3 8 to 25 5/16 – 1
    80 3-1/8 8 to 20 5/16 – 4/5
    90 3-1/2 8 to 20 5/16- 4/5
    100 4 8, 10, 12 5/16, 3/8, 1/2

    SIZES OF 904L STAINLESS STEEL SQUARE BARS

    Size (mm) Weight per meter (Kg) Size (mm) Weight per meter (Kg)
    12 x 12 1.14 30×30 7.11
    16 x 16 2.02 40 x 40 12.60
    20 x 20 3.16 50 x 50 19.80
    25 x 25 4.94

    Packing and shipping of ASTM A479 904l round bars

    ASTM A479 904l Round Bars are covered with plastic cloth and packed in wooden boxes, wooden pallets, and wooden fumigated containers. Using proper stripping on wood boxes with lifting points, our packaging is fully waterproof and safe for transportation.

     

     

    SS 904L Round Bar Application Industries

    Our Stainless Steel 904L Round bars are used in a wide range of applications and various industries. Below are a few of them:

    • Petrochemical Industry,
    • Oil and Gas Industry,
    • Chemical Industry,
    • Power Plant Industry,
    • Energy Industry,
    • Pharmaceuticals Industry,
    • Pulp & Paper industry,
    • Food Processing Industry,
    • Aerospace Industry,
    • Refining Industry.

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us