Twitter

Facebook

Instagram

317L Round Bar

 Titanium Grade 5

Table of Content

Titanium Alloy Grade 5 Rods, Titanium Gr 5 Bar, ASTM B348 Titanium Grade 5 Round Bars, Titanium Gr 5 Hexagonal Bar, Titanium UNS R56400 Bright Bar, Titanium Round Bar Suppliers and Dealer in Mumbai, India.

Titanium WERKSTOFF NR. 3.7165 Round Bars, Titanium Gr 5 Round Bar, Suppliers of ASTM B348 Ti. Alloy Gr. 5 Hex Bar, Grade 5 Titanium Alloy Forged Bars Exporter, Titanium Gr 5 Square Bar Manufacturer in India

    As one of the largest exporters, manufacturers, and suppliers of Titanium Grade 5 Round Bars in India, Titanixalloys.com can handle all types of Titanium Gr 5 Round Bars. These bars are ideal for applications up to 400°Celsius in temperature. There is 6 percent of aluminum, 4% vanadium, 0.25 percent of iron, 0.02 percent of oxygen, and the rest of titanium in its chemical composition. Although it is significantly stronger than commercially pure titanium, it also has the same stiffness and thermal properties as commercially pure titanium. One of its many advantages is its ability to be heat treated, which is one of its many advantages.

    This grade is an excellent combination of strength, corrosion resistance, weldability, and fabricability. In addition to being used in many aircraft airframes and engine components, it is also widely used in a variety of non-aerospace applications in the marine, offshore, and power generation industries. Additionally, these are available in various diameters, wall thicknesses, and sizes and are available at very affordable rates for our valuable customers.

    We offer a huge selection of Grade 5 Titanium Round Bars at Troxalloys.com, where the packaging specialists ensure that the products are packed in the best quality materials to ensure that they are safe during their journey. As a result of their lightweight, corrosion resistant, high strength, and corrosion resistance qualities, our Titanium Grade 5 Square Bars are suitable for a wide variety of applications. 

    As one of the most commonly used alloys, these titanium Grade 5 Flat Bars are thought to be more robust than commercially pure titanium while still maintaining the same toughness and thermal properties (without the thermal conductivity) as pure titanium. These Titanium Grade 5 Threaded Bars are the most widely utilized titanium alloy of the alpha–plus–beta session and they are as well the most communal of all titanium alloys. We are also offering our customers Titanium Grade 5 Hollow Bars in various sizes and shapes at our company as well. 

    For the majority of applications, these Titanium Grade 5 Hexagonal Bars are alloyed with small amounts of aluminum and vanadium, typically around 6 percent and 4 percent respectively, by weight, though “commercially pure” titanium has acceptable mechanical properties and has been used for orthopedic implants and dental implants for years. As a result of processing and heat treatment, our Titanium Grade 5 Triangular Bars can have improved mechanical properties for fracture-critical applications. There is no doubt that these Titanium Grade 5 Bars are resistant to general corrosion. However, environments that can cause the breakdown of the protective oxide layer, such as hydrofluoric (HF), hydrochloric (HCl), sulfuric and phosphoric acids, may damage them quickly.

    There are two additions to the titanium alloy that make up titanium grade 5 round bar, namely aluminum and vanadium, which give the material very high corrosion resistance properties. This is one of the most commonly used grades of titanium alloys. We are a leading manufacturer and supplier of Titanium Grade 5 Round Bars available in many types, sizes, shapes, and thicknesses. The composition consists of 90% titanium with carbon, iron, and oxygen, followed by 6% aluminum and 4% vanadium. In accordance with ASTM B348 specification, this type of material composition may be used to provide products with a minimum tensile strength of 950MPa and a minimum yield strength of 880MPa.

    Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Specification List Of Grade 5 Titanium Round Bar

    Dimensions BS, DIN, EN, AISI, JIS, ASME, ASTM
    size of Round bar Thickness: 2 millimeter-100 millimeter
    size of Flat bar Width: 10 millimeter – 500 millimeter
    Dia: 3 millimeter-~800 millimeter
    Channel Bars 80 x 40 millimeter- 150 x 75-millimeter section; 5.0 – 6.0 millimeter thickness
    size of Angle bar 3* 20* 20 milimeter~12* 100* 100-millimeter
    Size of Billet 1/2 – 495 millimeter Diameter
    Rectangular Bars Section 3 to 12millimeter thickness
    Form Round, Rod, T-Bars, Channel Bars, Precision Ground Bars, Flat Bars, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Threaded, Hex (A/F), Rectangle, Half Round Bars, Profiles, Billet, Ingot, Forging, I/H Bars, etc.
    Size of Rectangles 33 x 30 millimeters – 295 x 1066 millimeter
    Surface Sand Blasting Finished, Hot Rolled Pickled, Bright, Cold Drawn, Hairline, Polished
    Processing cutting to 650 millimeter
    Hollow Bars size 32mm Outside diameter x 16 millimeters Inside diameter to 250-millimeter Outside diameter x 200 millimeters Inside diameter)
    Tolerance H9, K9, H8, H12, K12, H11, H13, K10, K11, H10, or as per need
    Finish centreless ground, smooth turned, peeled, hot rolled, Rough Turned, Polish, Bright, Cold (bright) drawn, Centreless Ground, Grinding & Black, hot rolled annealed
    Method Cold Drawn, Hot Rolled, Cold Rolled Rod, Forged Round Bars
    Condition annealed, tempered and Hardened

     

    Titanium Grade 5 Chemical Structure

    Grade Ti C Fe Al V O
    Titanium Grade 5 90 min 0.25 max 6 min 4 min 0.02 max

     

    Titanium Grade 5 Mechanical Properties Table

    Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
    4.43 g/cm3 1632 °C (2970 °F) Psi – 138000, MPa – 950 Psi – 128000, MPa – 880 14 %

    Titanium Grade 5 Equivalent Grades

    STANDARD WERKSTOFF NR. UNS
    Titanium Grade 5 3.7165 R56400

    Types Of Available Products ASME, ASTM, EN, BS, GB, Titanium Gr.5 Round Bars

    • Titanium Gr 5 Rods
    • Grade 5 Titanium Round Bars
    • ASTM B348 Titanium Grade5 Bars
    • Titanium UNS R56400 Round Bars
    • Grade 5 Titanium Rods Manufacturer
    • B348 Titanium Grade 5 Polish Bars Manufacturer
    • AISI Titanium Gr 5 Black Bars Distributors
    • Top Quality High Titanium Gr 5 Spring Steel Bars
    • Titanium Grade 5 Bright Bar Exporter
    • ASME SB 348 Titanium Grade5 Forged Round Bars
    • Titanium Grade 5 Forging Bar Stock
    • Titanium Grade 5 Threaded Bars Stockiest in India
    • CP Ti Gr 5 Cold Drawn & Polished Square Bars
    • Austenitic ASTM Bright Titanium Gr 5 Bar
    • Titanium DIN 3.7165 Round Bars
    • AISI Titanium Grade 5 Hexagon Bars Dealers
    • Standard ASTM B348 Ti Gr 5 Cold Drawn Bars Stockholder
    • High-Speed Steel Titanium Grade5 Hollow Bar Suppliers
    • ASME, ASTM, EN, BS, GB, Titanium Gr.5 Flat Bars
    • Titanium Gr 5 Round Bar Suppliers
    • Cold Rolled Titanium Gr 5 Rods
    • Forged Ti Gr 5 Round Bar

    Grade 5 Titanium Hardness

    0.2% Proof of Stress

    Tensile Strength

    Elongation

    Reduction of area

    Hardness

    MPA

    MPA

    %

    %

    HRC

    Min

    Min

    Min

    Min

    Min

    827

    1034

    17

    25

    40

    Weight Chart Of Titanium Gr 5 Round Bar

    Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot
    1/8″ 0.062 0.019 22mm 2.979 0.908 3 to 1/4″ 41.996 12.800
    3mm 0.055 0.017 20mm 2.470 0.753 3″ 35.762 10.900
    4mm 0.098 0.030 24mm 3.543 1.080 3 to 3/4″ 55.780 17.001
    5/32″ 0.095 0.029 7/8″ 3.038 0.926 3 to 1/2″ 48.772 14.850
    5mm 0.154 0.047 1″ 3.970 1.210 4 to 1/4″ 72.249 21.908
    3/16″ 0.141 0.043 25mm 3.871 1.180 4″ 63.340 19.306
    6mm 0.223 0.068 27mm 4.490 1.368 4 to 3/4″ 90.249 27.366
    7/32″ 0.190 0.058 26mm 4.170 1.271 4 to 1/2″ 80.340 24.4487
    7mm 0.298 0.091 30mm 5.548 1.691 5 to 1/2″ 121.000 36.690
    1/4″ 0.249 0.076 1 to 1/8″ 5.033 1.534 5″ 99.940 30.461
    8mm 0.398 0.120 32mm 6.314 1.894 6 to 1/2″ 167.630 51.093
    5/16″ 0.387 0.118 1 to 1/4″ 6.349 1.924 6″ 143.900 43.860
    3/8″ 0.557 0.170 35mm 7.553 2.390 7 to 1/2″ 225.000 68.226
    9mm 0.498 0.152 1 to 3/8″ 7.550 2.303 7″ 196.000 59.432
    11mm 0.748 0.228 38mm 8.903 2.792 10″ 397.140 121.048
    10mm 0.620 0.189 36mm 7.999 2.438 8″ 254.55 77.586
    12mm 0.889 0.271 40mm 9.872 3.009
    7/16″ 0.761 0.232 1 to 1/2″ 8.951 2.715
    13mm 1.043 0.318 1 to 3/4″ 12.179 3.712
    1/2″ 0.994 0.303 1 to 5/8″ 10.449 3.200
    9/16″ 1.256 0.383 1 to 7/8″ 13.977 4.260
    14mm 1.207 0.368 45mm 12.555 3.807
    5/8″ 1.551 0.473 50mm 15.414 4.698
    15mm 1.391 0.424 48mm 14.205 4.330
    17mm 1.791 0.543 2 to 1/8″ 17.963 5.475
    16mm 1.578 0.481 2″ 15.906 4.848
    18mm 2.001 0.610 60mm 22.205 6.768
    11/16″ 1.880 0.573 2 to 1/4″ 20.128 6.135
    3/4″ 2.237 0.682 2 to 3/8″ 22.435 6.838
    2 to 1/2″ 24.856 7.576
    2 to 5/8″ 27.409 8.354
    2 to 3/4″ 30.083 9.169

     

    Size Range Of Grade 5 Titanium Round Bar

    US Bar

    Metric

    Japanese

    Canadian/ASTM

    Diameter (Inch)

    Size of Bar

    Diameter (millimeter)

    size of Bar

    Diameter (millimeter)

    size of Bar

    Diameter (millimeter2)

    size of Bar

    0.375

    #3

    5.5

    5.5

    10

    10

    200

    15M

    0.250

    #2

    5

    5

    6

    6

    100

    10M

    0.625

    #5

    7

    7

    16

    16

    500

    25M

    0.500

    #4

    6

    6

    13

    13

    300

    20M

    0.875

    #7

    9

    9

    22

    22

    1000

    35M

    0.750

    #6

    8

    8

    19

    19

    700

    30M

    1.125

    #9

    11

    11

    29

    29

    2500

    55M

    1.000

    #8

    10

    10

    25

    25

    1500

    45M

    1.375

    #11

    14

    14

    35

    35

    1.250

    #10

    12

    12

    32

    32

    1.625

    #13

    18

    18

    41

    41

    1.500

    #12

    16

    16

    38

    38

    1.875

    #15

    22

    22

    48

    48

    1.750

    #14

    20

    20

    44

    44

    2.250

    #18

    28

    28

    57

    57

    2.000

    #16

    25

    25

    51

    51

    36

    36

    32

    32

    44

    44

    40

    40

    50

    50

     

    Tolerances Of Titanium Grade 5

    Section/Shape

    diameter, Size, or width across flats

    variation Permitted

    millimeter

    millimeter

    Flat (thickness)

    < 18

    > 30 ≦ 50

    > 18 ≦ 30

    > 50 ≦ 80

    + 0 to – 00.110

    + 0 to – 00.250

    + 0 to – 00.130

    + 0 to – 00.350

    Square and

    hexagon

    > 18 ≦ 30

    ≥ 6 ≦ 18

    > 50 ≦ 80

    > 30 ≦ 50

    > 80 ≦ 105

    + 0 to – 00.110

    + 0 to – 00.090

    + 0 to – 00.160

    + 0 to – 00.130

    + 0 to – 00.250

    Round

    > 18 ≦ 30

    ≥6 ≦ 18

    > 50 ≦ 80

    > 30 ≦ 50

    > 80 ≦ 100

    + 0 to – 00.085

    + 0 to – 00.070

    + 0 to – 00.120

    + 0 to – 00.100

    + 0 to – 00.140

    Flat (width)

    < 18

    > 30 ≦ 50

    > 18 ≦ 30

    > 80 ≦ 100

    > 50 ≦ 80

    > 100 ≦ 130

    > 160 ≦ 320

    > 130 ≦ 160

    + 0 to – 00.110

    + 0 to – 00.160

    + 0 to – 00.130

    + 0 to – 00.220

    + 0 to – 00.190

    + 0 to – 00.350

    + 1.00 to – 1.00

    + 0 to – 1.00

    ISO Tolerance Of Titanium Grade 5 Round Bar

    Type

    SIZES (Inches)

    SIZES (millimeters)

    ISO Tolerance

    Polished and Peeled

    1.50” to 6.00”

    40.00 to 150.00

    h11, ASTMA-484 h11-DIN 1013

    Ground and Cold Drawn

    5/6” to 2.50”

    10.00 to 75.00

    h8-h9-h10-h11

    Ground and Peeled

    3/4″ to 2.00”

    20.00 to 50.00

    h9-h10-h11, ASTM B408

    Polish and Cold Drawn

    1/8” to 3.00”

    3.00 to75.00

    h8-h9-h10-h11, ASTM B408

     

    Titanium Grade 5 Round Bar Price In India

    Description

    Per Unit (INR)

    Price in USD

    Price in EURO

    Grade 5 Ams 4928 Titanium Round Bars

    3,164

    42.87

    35.37

    Ti6al-4v To Ams 4928 Titanium Grade 5 Round Bar

    3,258

    44.15

    36.42

    Astm B348/ams 4928 Titanium Bars Grade 5 (6al4v)

    1,882

    25.50

    21.04

    Ti 6 Al4v Eli-grade 5 Titanium Alloy round bar

    4,321

    58.55

    48.30

    40,000 Mm Dia X Rl Timeta l 6-4 Titanium Sq Bar

    5,052

    68.46

    56.47

    Dia: 3.5 X 1521-1953 Mm R/l (Scbti0230) (679 Lbs.) Astm B348-11 Grade 5 Titanium Round Bars Ti 6al-4v

    2,255

    30.56

    25.21

    astm B348 Grade 5 Titanium Bar-30mm Diamtr Ti6al4 Ann

    3,861

    52.32

    43.16

    Titanium Round Bar Grade 5 (Aerospace) 90mm (3.5433) X Fix Length 56.5kgs

    132,782

    1799.25

    1484.16

    Astm B348 Dia: 2.625 X 6 (3 Pcs.) (187 Lbs.) Titanium Round Bars Grade 5

    2,371

    32.13

    26.50

    Astm B348 2.625 Diameter X 6 (3 Pcs) Titanium Round Rod Bar, Grade 5 Per

    2,483

    33.65

    27.75

    Dia: 2.625 X 65 R/l Scbt10146 (1347 Lbs.) 24 Pcs. Astm B348-11 Grade 5 Titanium Round Bars 6al-4v

    2,252

    30.52

    25.17

    Dia: 3.5 X 9 R/l Astm B348-11 Grade 5 Titanium Round Bars 6al-4v

    2,102

    28.48

    23.49

    Grade 5 Titanium Standard

    • ASTM B348 GR5
    • MIL-T-9047
    • AMS 4965 (in 4” diameter and smaller)
    • AMS 4928
    • AMS 6931 (for parts requiring good weldability and ductility)
    • AMS 4967

    Grade 5 Titanium Test Certificates

    Our company, Tronixalloys.com, offers Manufacturer Test Certificates (TCs) that comply with EN 10204/3.1B, Raw Materials Certificates, Radiography Test Reports, and Third Party Inspection Reports. It is also our pleasure to provide standard certificates such as EN 10204 3.1, as well as additional requirements, NACE MR 01075. As requested by our clients, we can provide ferrite content according to norms.

    • EN 10204/3.1B,
    • Raw Materials Certificate
    • 100% Radiography Test Report
    • Third Party Inspection Report, etc

    ASTM, ASME, and API Titanium Grade 5 Bars Value-Added Services

    Material Testing:

    Our company at Tronixalloys.com ensures that all the materials we use for our clients undergo stringent quality tests before being dispatched to them.

    • Mechanical Testing Such as Tensile of Area
    • Hardness Test
    • Chemical Analysis – Spectro Analysis
    • Positive Material Identification – PMI Testing
    • Flattening Test
    • Micro and MacroTest
    • Pitting Resistance Test
    • Flaring Test
    • Intergranular Corrosion (IGC) Test

    Documentation

      • Commercial Invoice which includes HS Code
      • Packing List including net weight and gross weight, number of boxes, Marks, and Numbers
      • Certificate of Origin legalized/attested by the Chamber of Commerce or Embassy
      • Fumigation Certificates
      • Raw Material Test Reports
      • Material Traceability Records
      • Quality Assurance Plan (QAP)
      • Heat Treatment Charts
      • Test Certificates certifying NACE MR0103, NACE MR0175
      • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
      • Guarantee Letter
      • NABL-approved Laboratory Test Reports
      • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
      • Form A for the purposes of the Generalized System of Preferences (GSP)

    Titanium Grade 5 Round Bar Packaging

    The package we take is usually packed Titanium Grade 5 Round Bar with environmental poly bags, and then in a free fumigation wooden case or wooden plate, which is a guarantee of quality. In addition to offering all of the requirements to satisfy your Grade 5 Titanium Round Bar pack requirements, we are also able to offer customized packages such as OEM by negotiation. We place a lot of emphasis on packing and packaging. The AISI Grade 5 Round Bars are packed in wooden corrugated boxes that have been foil wrapped in plastic wrap and bubble wrap.

    Titanium Grade 5 Round Bar Application Industries

    • Off-Shore Oil Drilling Companies
    • Power Generation
    • Petrochemicals
    • Gas Processing
    • Specialty Chemicals
    • Pharmaceuticals
    • Pharmaceutical Equipment
    • Chemical Equipment
    • Sea Water Equipment
    • Heat Exchangers
    • Condensers
    • Pulp and Paper Industry

     

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us