tronixalloys@gmail.com

7021800392

Twitter

Facebook

Instagram

317L Round Bar

F12 Alloy Steel Round Bars

Contact Us

Table of Content

F12 Alloy Steel Round bars

Alloy Steel 1.7335 Round Bar, F12 Alloy Steel Round Bar, ASTM A182 Alloy Steel F12 Round Bar, ASTM A182 Chrome Moly F12 Bar Exporter, ASTM A182 Alloy Steel F12 Round Bar Supplier, Alloy Steel K11562 Round Bar, Alloy Steel F12 Round Bar, Alloy Steel F12 Round Bar Manufacturer in India.

UNS K11564 Hot Rolled Round Bar Trader, F12 Cr-Mo Polished Round Bar Stockists, Alloy Steel DIN 1.7335 Flat Round Bars Dealer, ASTM A182 Alloy Steel F12 Cold Rolled Round Bars, Cr-Mo F12 Round Bar, Chrome Moly F12 Round Bar ASME SA182 Alloy Steel F12 Round Bar Supplier in India.

    Tronixalloy.com manufactures and exports a wide range of industrial application products. We are a prominent manufacturer of 316 / 316L Round Bar at affordable prices. As a long-term provider of services, we are concerned about each client’s assurance that the order will be fulfilled within the time frame agreed upon. In order to maintain the national and international quality standards of SS 316/316L Bars & Rods, we never compromise on quality or productivity.

    There is no alloy that is more corrosion resistant than 316 / 316L Round Bar. It is recommended for thermal processes, pressure fittings, valves, flanges, etc. The addition of molybdenum prevents pitting in chloride-containing atmospheres and crevice corrosion. A passive layer is present on the surface of 316 / 316L Round Bars to prevent corrosion attacks in water-based media or in oxidising environments. Salt and bleach are present in the media of an appliance, but it is not rust-proof or suitable for welding.

    316 / 316L Round Bar appliances are found in cryogenic temperatures. Weldability and durability are excellent. A nickel-chromium microstructure provides superior tensile strength, corrosion resistance, and stress-to-rupture properties. Blackish and saline water are suitable environments for 316 / 316L Round Bars, and it has a passive layer to resist crevice corrosion. However, it is not recommended in media where pitting corrosion may occur.

    In addition to installing modern tools in a production facility, Tronixalloy.com has a separate expert team for guiding our workers. We bring high-grade raw materials

    from our vendors and use them to manufacture products of premium quality. Due to the guidance of the expert, we make a stable chemical mixture and develop it with all mechanical properties. The entire workforce works under the supervision of experts, making proper use of technology for making a reliable solution into a stable 316 / 316L Round Bar.

    We Experts conduct various tests at various stages of production to ensure the quality of these 316 / 316L Round Bars. As per client requirements, we manufacture SS 316/316L Bars & Rods as well. With all beneficial qualities, we offer these Rods and Bars in the required quantity.

    One of the most versatile and widely used stainless steels is 316 / 316L Round Bar. Their chemical composition contains about 18% chromium and 8% nickel. This would improve corrosion resistance and overall performance. Some of the best mechanical properties can be found in the low carbon version of the 316 / 316L Round Bar material. 316 / 316L Round Bars are priced based on their thickness. From 14″ to 5″, the price is about 155/kg.

    316 / 316L Round Bar is a superior performing alloy used mostly in high corrosion applications. In high temperature applications, they can withstand corrosion more effectively. The low-carbon version is resistant to decay at the welding site. 316 / 316L Round Bar Price In India is around 250/kg. Prices may vary depending on quality, thickness, and other factors.

    Tronixalloy.com uses modern technology to develop products with premium quality. As a leading manufacturer of industrial products, we offer our clients products at factory prices. Our company offers a wide range of industrial products to satisfy the needs of our customers. Tronixalloy.com manufactures F12 Alloy Steel Round bars using high-quality raw materials. 

    It has excellent strength, standard thickness, perfect length, and other specifications. It has a high durability with a seamless finish, making F12 alloy steel round bars ideal for high utility applications. It is visually appealing and has great features such as comprehensive durability and robust construction. Due to the addition of Chromium and Molybdenum, F12 Alloy Steel Round bars are strong at high temperatures. In an oxidising and harsh environment, it exhibits excellent corrosion resistance.

    Tronixalloy.com produces solid F12 Alloy Steel Round bars that are durable and reliable in harsh environments. Taking high-quality raw materials is the first step in manufacturing the product. We are a team of highly skilled, experienced, and qualified professionals working hard to deliver perfectly suitable Round Bars to various industries. As a result, we develop a perfect standard flawless product that exhibits all features and specifications for handling pressure. Tronixalloy.com also manufactures F12 Alloy Steel Round bars based on client specifications. These Round Bars can be customised as well as non-customized.

    Our F12 Alloy Steel Round bars undergo all standard tests to ensure they are flawless. Orders are also packed and delivered by Tronixalloy.com. Round Bars are packaged eco-friendly to prevent damage or scratches. With our prepared stock of Round Bars, we can meet the urgent needs of our clients. As a professional company, we are happy to provide excellence to our clients and to fulfil their needs and demands at a reasonable price and on time.

     

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Specification of F12 Alloy Steel Round bars

    Dimensions

    EN, DIN, JIS, ASTM, BS, ASME, AISI

    Size

    5 mm To 500 mm

    Diameter

    0.1 mm to 100 mm

    Length

    100 mm To 6000 mm Long & Above

    Finish

    Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

    Tolerance

    H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

    Form

    Round, Square, Hex (A/F),Flate, Rectangle, Billet, Ingot, Forging Etc.

    Stainless Steel

    ASTM A-479, A-182, 304, 304L,304H,304S, 316, 316L,316 Ti, 316H, 309, 310, 310S, 317L, 321, 347, 409, 410, 420, 430, 440, 446, 904L. etc.

    Duplex Steel

    2205, 31803, 32750, 32760, 2101, 2304.

    Alloy Steel

    A-182 – F5, F9, F11, F12, F21, F22 & F91

    Special Grade

    Stainless Steel 17-4 PH, Alloy 800, Alloy 600. Hastelloy C276.

    Carbon Steel

    A 105, LF 2, Duplex Steel.

    Alloy Steel F12 Round Bars Chemical Composition

    Grade

    C

    Cr

    Si

    S

    Mn

    P

    Mo

    ASTM A182 F12

    0.10 – 0.20

    1.00 – 1.50

    0.50 – 0.80

    0.040

    0.40 – 0.65

    0.025

    0.44 – 0.65

    Alloy Steel F12 Round Bars Mechanical Properties

    Grade

    Tensile Strength (ksi) min

    Elongation (% in 50mm) min

    Yield Strength 0.2% Proof (ksi) min

    Hardness

    ASTM A182 F12

    415

    30

    205

     

    Condition

    H&T Hardened and tempered.
    ANN Annealed
    PH Precipitation hardened.

    Surface finish

    CG Centreless ground HF Hot finished
    CF Cold finished HRAP Hot rolled annealed and pickled
    P&T Peeled and turned RT Rough turned/peeled
    CD Cold drawn P Polished
    BD Bright drawn SRE Slit rolled edge
    ST Smooth turned PR Peeled and reeled

    Alloy Steel F12 Round Bars Equivalent Grades

    STANDARD UNS WERKSTOFF NR.
    ASTM A182 F12 K11562 1.7335

    Alloy Steel Grade F12 Round Bar Sizes

    Type SIZES (mm) SIZES (Inches) ISO Tolerance
    Cold Drawn and Ground 10.00 – 75.00 5/6″ – 2.50″ h8-h9-h10-h11
    Cold Drawn and Polish 3.00 – 75.00 1/8″ – 3.00″ h8-h9-h10-h11
    Peeled and Polished 40.00 – 150.00 1.50″ – 6.00″ h11, h11-DIN 1013
    Peeled and Ground 20.00 – 50.00 3/4″ – 2.00″ h9-h10-h11

    Standard lengths of alloy steel grade F12 bars range from 2000 mm to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

    5.0 45.0
    6.0 50.0
    7.0 55.0
    8.0 60.0
    9.0 65.0
    10.0 70.0
    12.0 75.0
    16.0 80.0
    20.0 90.0
    25.0 100.0
    30.0 130.0
    35.0 160.0
    40.0 200.0

    Weight Chart Per Linear Foot Of F12 Alloy Steel Round bars

    SIZE IN INCHES ROUND OCTAGON SQUARE HEXAGON SIZE IN INCHES HEXAGON SQUARE ROUND OCTAGON
    1/16 .010 .011 .013 .012 11/16 1.392 1.607 1.262 1.333
    5/64 .017 .018 .022 .019 45/64 1.456 1.681 1.320 1.394
    3/32 .023 .024 .029 .025 23/32 1.521 1.756 1.380 1.487
    7/64 .031 .033 .039 .034 47/64 1.588 1.834 1.440 1.521
    1/8 .042 .044 .053 .046 3/4 1.656 1.913 1.502 1.586
    9/64 .053 .056 .067 .058 25/32 1.797 2.075 1.630 1.721
    5/32 .065 .069 .083 .072 13/16 1.944 2.245 1.763 1.862
    11/64 .079 .083 .100 .087 27/32 2.096 2.421 1.901 2.008
    3/16 .094 .099 .120 .104 7/8 2.254 2.603 2.045 2.159
    13/64 .110 .116 .140 .121 29/32 2.418 2.792 2.193 2.316
    7/32 .128 .135 .163 .141 15/16 2.588 2.988 2.347 2.479
    15/64 .147 .155 .187 .162 31/32 2.763 3.191 2.506 2.646
    1/4 .167 .176 .213 .184 1 2.945 3.400 2.670 2.820
    17/64 .188 .199 .240 .207 1-1/16 3.324 3.838 3.015 3.183
    9/32 .211 .223 .269 .233 1-1/8 3.727 4.303 3.380 3.569
    19/64 .235 .248 .300 .259 1-3/16 4.152 4.795 3.766 3.977
    5/16 .261 .275 .332 .288 1-1/4 4.601 5.313 4.172 4.407
    21/64 .288 .304 .360 .318 1-5/16 5.072 5.857 4.600 4.858
    11/32 .316 .334 .402 .348 1-3/8 5.567 6.428 5.049 5.332
    23/64 .345 .364 .439 .381 1-7/16 6.085 7.026 5.518 5.827
    3/8 .376 .397 .478 .414 1-1/2 6.625 7.650 6.008 6.345
    25/64 .408 .431 .519 .450 1-9/16 7.189 8.301 6.519 6.885
    13/32 .441 .466 .561 .486 1-5/8 7.775 8.978 7.051 7.446
    27/64 .475 .502 .605 .524 1-11/16 8.385 9.682 7.604 8.030
    7/16 .511 .540 .651 .564 1-3/4 9.018 10.41 8.178 8.634
    29/64 .548 .579 .698 .604 1-13/16 9.673 11.17 8.773 9.265
    15/32 .587 .620 .747 .647 1-7/8 10.35 11.95 9.388 9.911
    31/64 .627 .662 .798 .692 1-15/16 11.05 12.76 10.02 10.58
    1/2 .668 .705 .850 .736 2 11.78 13.60 10.68 11.28
    33/64 .710 .750 .904 .783 2-1/16 12.53 14.46 11.36 11.99
    17/32 .754 .796 .960 .831 2-1/8 13.30 15.35 12.06 12.73
    35/64 .799 .844 1.017 .881 2-3/16 14.09 16.27 12.78 13.49
    9/16 .845 .892 1.076 .932 2-1/4 14.91 17.21 13.52 14.27
    37/64 .893 .943 1.136 .985 2-5/16 15.75 18.18 14.28 15.08
    19/32 .941 .994 1.199 1.038 2-3/8 16.61 19.18 15.06 15.91
    39/64 .992 1.048 1.263 1.094 2-7/16 17.49 20.20 15.87 16.75
    5/8 1.043 1.102 1.328 1.150 2-1/2 18.40 21.25 16.69 17.62
    41/64 1.096 1.207 1.395 1.209 2-9/16 19.34 22.33 17.53 18.52
    21/32 1.150 1.214 1.464 1.268 2-5/8 20.29 23.43 18.40 19.43
    43/64 1.205 1.272 1.535 1.329 2-11/16 21.27 24.56 19.29 20.37
    SIZE IN INCHES HEXAGON SQUARE ROUND OCTAGON SIZE IN INCHES SQUARE ROUND OCTAGON
    2-3/4 22.27 25.71 20.19 21.33 6 122.4 96.13 101.5
    2-3/16 23.29 26.90 21.12 22.31 6-1/16 125.0 98.15 103.6
    2-7/8 24.34 28.10 22.07 23.31 6-1/8 127.6 100.2 105.8
    2-5/16 25.41 29.34 23.04 24.33 6-3/16 130.2 102.2 108.0
    3 26.50 30.60 24.03 25.38 6-1/4 132.8 104.3 110.2
    3-1/16 27.62 31.89 25.05 26.45 6-5/16 135.5 106.4 112.4
    3-1/8 28.76 33.20 26.08 27.54 6-3/8 138.2 108.5 114.6
    3-3/16 29.92 34.55 27.13 28.65 6-7/16 140.9 110.7 116.9
    3-1/4 35.91 28.21 29.79 6-1/2 143.7 112.8 119.1
    3-5/16 37.21 29.30 30.94 6-9/16 146.4 115.0 121.4
    3-3/8 38.73 30.42 32.12 6-5/8 149.2 117.2 123.8
    3-7/16 40.18 31.55 33.32 6-11/16 152.1 119.4 126.1
    3-1/2 41.6 32.71 34.54 6-3/4 154.9 121.7 128.5
    3-9/16 43.15 33.90 35.79 6-13/16 157.8 123.9 130.9
    3-5/8 44.68 35.09 37.07 6-7/8 160.7 126.2 133.3
    3-1/16 46.23 36.31 38.34 6-15/16 163.6 128.5 135.7
    3-3/4 47.81 37.55 39.65 7 166.6 130.9 138.2
    3-3/16 49.42 38.81 40.99 7-1/16 169.6 133.2 140.7
    3-7/8 51.05 40.10 42.34 7-1/8 172.6 135.6 143.2
    3-5/16 52.71 41.40 43.72 7-3/16 175.6 138.0 145.7
    4 54.40 42.73 45.12 7-1/4 178.7 140.4 148.2
    4-1/16 56.11 44.07 46.54 7-5/16 181.8 142.8 150.8
    4-1/8 57.85 45.44 47.98 7-3/8 184.9 145.2 153.4
    4-3/16 59.62 46.83 49.45 7-7/16 188.1 147.7 156.0
    4-1/4 61.41 48.23 50.93 7-1/2 191.3 150.2 158.6
    4-5/16 63.23 49.66 52.44 7-5/8 197.7 155.3 164.0
    4-3/8 65.08 51.11 53.98 7-3/4 204.2 160.4 169.4
    4-7/16 66.95 52.58 55.53 7-7/8 210.9 165.6 174.9
    4-1/2 68.85 54.08 57.10 8 217.6 170.9 180.5
    4-9/16 70.78 55.59 58.70 8-1/4 230.9 181.8 192.0
    4-5/8 72.73 57.12 60.32 8-1/2 245.7 192.9 203.8
    4-1/16 74.71 58.68 61.96 8-3/4 259.6 204.4 215.8
    4-3/4 76.71 60.25 63.63 9 275.4 216.3 228.4
    4-3/16 78.75 61.85 65.32 10 340.0 267.0 282.0
    4-7/8 80.80 63.46 67.02 11 411.4 323.1 341.2
    4-5/16 82.89 65.10 68.75 12 489.6 384.4 406.1
    5 85.00 66.76 70.50 13 575 451 476
    5-1/16 87.14 68.44 72.27 14 666 523 552
    5-1/8 89.30 70.14 74.07 15 765 601 634
    5-3/16 91.50 71.86 75.89 16 871 684 721
    5-1/4 93.71 73.60 77.72 17 982 772 814
    5-5/16 95.96 75.36 79.59 18 1102 865 912
    5-3/8 98.23 77.15 81.47 19 1227 964 1017
    5-7/16 100.5 78.95 83.38 20 1360 1068 1127
    5-1/2 102.9 80.78 85.30 21 1499 1177 1242
    5-9/16 105.2 82.62 87.25 22 1645 1292 1363
    5-5/8 107.6 84.49 89.23 23 1798 1412 1490
    5-1/16 110.0 86.38 91.22 24 1958 1538 1622
    5-3/4 112.4 88.29 9323 25 2125 1669 1760
    5-3/16 114.9 90.22 95.27 26 2298 1805 1904
    5-7/8 117.4 92.17 97.33 27 2478 1946 2053
    5-5/16 119.9 94.14 99.41 28 2665

    Markings On The F12 Alloy Steel Round bars

    • Rating Designation
    • Material Designation
    • “WP” in grade symbol
    • Grade
    • Schedule number or nominal wall thickness
    • Heat Code
    • Manufacturer’s Name or Symbol

    Application industry Of F12 Alloy Steel Round bars

    • Paper & Pulp Companies
    • High Pressure Applications
    • Oil and Gas Industry
    • Chemical Refinery
    • Pipeline
    • Temperature Application
    • Water Pipe Line
    • Nuclear Power Plants
    • Food Processing and Dairy Industries
    • Boiler & Heat Exchangers

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us