Incoloy 825
Table of Content
Incoloy 825 Round Bar, Incoloy Alloy 825 Hexagonal Bars, Incoloy 825 Threaded Bars, ASTM B408 825 Incoloy Round Bar at Best Price, Incoloy 825 Polished Bars Manufacturer.
Incoloy 825 Bright Bars, Incoloy 2.4858 Round Bars, Incoloy 825 Cold Finish Round Bars, ASTM B408 Incoloy 825 Round Bars, Incoloy 825 Forged Bar Exporters in India.
We started out by manufacturing round bars at Tronixalloys.com and we have now expanded into a wide variety of steel products, including the Incoloy 825 bar, steel bars, round bars, bright bars, square bars, hex bars, flat bars, rectangular bars, black bars, threaded bars, forged bars, and rods. Throughout our company’s history, we have established a strong foundation of highly dedicated staff members who always set the right momentum so that we can be ever ready for the next level.
Throughout the company’s history, we have placed a high emphasis on ensuring customer satisfaction through the provision of superior products, highly reliable quality, and competitive pricing.
In general, nickel alloys are known for their ability to withstand extremely high temperatures, which is their primary advantage. It is well known that ASTM B425 UNS N08825 Bar Stock possesses tensile strength that is not compromised when exposed to moderately high temperatures due to its nickel content which ranges between 38% and 46%. Incoloy 825 Square bars are widely used in nuclear fuel reprocessing applications, where they are considered valuable.
A nuclear reprocessing process is one where spent nuclear fuel is removed from its spent state and chemical products like fission products and superfluous uranium are removed. It is important to remember that fission emits heat, so for processing their products to be as hot as possible, they will need alloys that can withstand extremely high temperatures, such as UNS N08825 Bright Bar. As a superalloy, 2.4858 Alloy 825 Rod exhibits resistance to thermal creep deformation.
In addition to its strength under extreme stress conditions, this alloy is also remarkably resistant to deformation under extreme stresses. As a result, this alloy can be used in both high pressure, as well as high temperature applications.
As Inconel 825 Hex Bar has a sufficient nickel content and it can withstand conditions conducive to corrosion, it is easier to use even under adverse conditions such as saltwater or chloride corrosion cracking. The mechanical properties of the Alloy 825 Flat Bar are generally good up to a temperature of 1000°F, but above this temperature, microstructural changes cause the alloy to lose its ductility and impact strength.
Due to the rapid hardening of Incoloy DIN 2.4858 Hex Bars, traditional methods of shaping and machining them are not as easy as they could be. After age hardening, Incoloy 825 Cold Finished Bars can be machined almost completely in solutionized form, with only a few finishing steps required. It is common for work hardening to plastically deform either the workpiece or the tool during subsequent passes.
825 Incoloy cold-finished steel or metal bars are bright bars made from this alloy. Due to the fact that no or very little heat is used throughout the entire process of converting hot-rolled bars (also known as black bars) into cold-finished bars (or bright steel bars), these processes are referred to as Cold Finish processes.
A nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium, Incoloy 825 is made up of nickel, iron, and chromium. As a high-strength material which offers excellent corrosion resistance, it can be used in a wide range of environments, such as those which contain sulfuric acid, phosphoric acid, and seawater, among others. There is also a resistance to pitting, crevice corrosion, and stress corrosion cracking in Incoloy 825 as well.
Incoloy 825 is commonly used in chemical processing, pollution control, oil and gas production, as well as marine engineering applications. As a result, it is commonly used in heat exchangers, piping systems, and pressure vessels as well. The material’s high corrosion resistance makes it a suitable material for use in aggressive environments due to its high corrosion resistance.
As a metal alloy, Incoloy 825 can be obtained in a variety of forms, such as bars, sheets, plates, pipes, and fittings. In addition to its versatility, it can be easily fabricated, welded, and machined, which makes it an ideal material for a wide variety of applications.
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.
Incoloy 825 Round Bar Specifications
|
Grade |
Inconel 825 – UNS N08825, Nickel Alloy 825 |
|
Specification |
ASTM B425 UNS N08825 |
|
Standard |
ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS |
|
alloy 825 Round bar size |
Diameter: 3-~800mm |
|
825 Incoloy Hex Bar size |
2-100mm A/F |
|
Inconel Alloy 825 Flat bar size |
Thickness: 2 -100mm |
|
Width: 10 to 500mm |
|
|
825 Incoloy Alloy Square bar size |
4 to 100mm |
|
Inconel 825 Angle bar size (in mm) |
3*20*20~12*100*100 |
|
ASTM B425 Incoloy 825 Section |
3.0 to 12.0mm thickness |
|
Inconel WERKSTOFF NR. 2.4858 Channel Bar (in mm) |
80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
|
Nickel Alloy 825 Hollow Bar (in mm) |
32 OD x 16 ID to 250 OD x 200 ID) |
|
2.4858 Incoloy 825 Billet Size |
1/2″ to 495mm Diameter |
|
ASTM B425 825 Incoloy Rectangles Size |
33 x 30mm to 295 x 1066mm |
|
825 Incoloy Round Bar Finish |
Cold (bright) drawn, centerless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, rough turned, bright, polished, ground, centreless ground, and black. |
|
Inconel Alloy 825 Round Bar Surface |
Bright, hot rolled pickled, cold drawn, sand blasted, polished, hairline |
|
Inconel 825 round bar Condition |
Hardened & tempered, annealed |
|
825 Incoloy Bar Technique |
Forged Round Bars, Rods, Cold Drawn Round Bars, Cold Rolled Round Bars |
|
Incoloy 825 Din 2.4858 Round Bar Tolerance |
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
|
UNS N08825 Incoloy Bar Processing |
Bar cutting to 650mm |
|
Our Inconel 825 round bar stockyard in India |
Tirunelveli, Agra, Shivamogga, Tiruchirappalli, Noida, Dhanbad, Coimbatore, Bhubaneswar, Hyderabad, Gujarat, Mumbai, Thiruvananthapuram, Bengaluru, Ahmedabad, Chennai, Pune, Navi Mumbai, Pimpri-Chinchwad, |
|
The Inconel Alloy 825 Round bar we offer is NACE MR0175/ISO 15156 certified |
|
Inconel 825 Round Bar Chemical Composition
| Grade | Ni | Cr | Fe | Mb | Ti | Cu | Mn | C | S | Al | Si |
| Incoloy 825 | 38.0 – 46.0 | 19.5 – 23.5 | 22.0 min | 2.5 – 3.5 | 0.6 – 1.2 | 1.5 – 3.0 | 1.0 max | 0.05 max | 0.03 max | 0.2 max | 0.5 max |
Mechanical & Physical Properties – Incoloy 825
| Density | 8.14 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2% Offset) | Psi – 32,000 , MPa – 220 |
| Elongation | 30 % |
Incoloy 825 Round Bars Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | ЭП703 | NFE30C20DUM | NCF 825 | NA 16 | NiCr21Mo | XH38BT |
| Standards | Designation |
| ASTM | B 408 |
| ASME | SB 408 |
Types Of Available Products Incoloy 825 Round Bars Live Inventory
- Distributors of Incoloy 825 black bars
- A top quality High Incoloy 825 Alloy Spring Steel Bar
- Exporter of Incoloy 825 bright bars
- Rods made from Incoloy Alloy 825
- Round bars made of Inconel 825
- Bars of Incoloy 825 ASTM B425
- Round bars made from Incoloy UNS N08825
- The manufacturer of ASTM B425 Incoloy Alloy 825 rods
- Manufacturer of B425 Inconel 825 Polish Bars
- Forged round bars in Incoloy 825 in accordance with ASME SB 425
- Dealers of Incoloy 825 Alloy Hexagon Bars
- Stockholder in Inconel 825 Cold Drawn Bars
- Suppliers of high-speed steel incoloy 825 hollow bars
- Flat bars made of Incoloy Alloy 825 in DIN, EN, ASTM, ASME
- Round bars made from Incoloy 825 alloy
- The largest stockist of 825 Incoloy Threaded Bars in India
- Stainless steel square bars cold drawn and polished in alloy 825
- Incoloy 825 Bar ASTM Austenitic
- Round bars made from Incoloy Werkstoff No. 2.4858
- Alloy 825 cold rolled rods
Types of Incoloy 825 Round Bars & Wire:
| • | ASTM B 408 Incoloy 825 Round Bars |
| • | ASME SB 408 Incoloy 825 Rods |
| • | Incoloy 825 Round Bars |
| • | Incoloy 825 Rods |
| • | ASTM B 408 Incoloy 825 Wires |
| • | ASTM SB 408 Incoloy 825 Wires |
|
COMMERCIAL NAME |
UNS | W.N. | BS |
INTERNATIONAL DESIGNATION |
DESCRIPTION | MELTING PRACTICES | ||
| AOD | ESR | VAR | ||||||
|
Alloy 825/ Incoloy 825 Alloy 65 |
N08800 N08800 |
2.4858 |
NA16 NA41 |
NiCr21Mo NiFe30Cr21Mo3 |
√ | |||
Type of Incoloy 825 Bar
|
Incoloy 825 Round Bar |
Incoloy 825 Bright Bar |
Incoloy 825 Square Bar |
Incoloy 825 Hex Bar |
Incoloy 825 Rectangle Bar |
|
Incoloy 825 Flat Bar |
Incoloy 825 Black Bar |
Incoloy 825 Threaded Bar |
Incoloy 825 Forged Bar |
Incoloy 825 Rod |
Incoloy 825 Round Bar
|
Manufacturer | Dealer | Supplier | Stockist | Distributor Trade Name: Incoloy 825 Bar Standard: ASTM B 166, ASTM B 160, ASTM B 164, ASTM B 446, ASTM B 637, ASTM B 408, ASTM B 425, ASTM B 574, ASTM B 335, ASTM B 473, ASTM B 649 Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements Material Grades: Inconel 600 Inconel 601 Inconel 625 Inconel 718 Inconel 800 Inconel 925 Inconel 825 Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks, and special Shapes. Round bar weight calculations The most common hot-selling Round Bar grades include:
Inconel 825 Round Bar Weight Chart
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Incoloy 825 Round Bar Sizes
THD allows you to select the size of Inconel UNS N08825 bars.
|
Size & Dimensions of Inconel 825 round bar |
|||||||
|
Metric |
US Bar |
ASTM/ Canadian |
Japanese |
||||
|
Bar Size |
Diam. (mm) |
Bar Size |
Diam. (Inch) |
Bar Size |
Diam. (mm2) |
Bar Size |
Diam. (mm) |
|
5 |
5 |
#2 |
0.250 |
10M |
100 |
6 |
6 |
|
5.5 |
5.5 |
#3 |
0.375 |
15M |
200 |
10 |
10 |
|
6 |
6 |
#4 |
0.500 |
20M |
300 |
13 |
13 |
|
7 |
7 |
#5 |
0.825 |
25M |
500 |
16 |
16 |
|
8 |
8 |
#6 |
0.750 |
30M |
700 |
19 |
19 |
|
9 |
9 |
#7 |
0.875 |
35M |
1000 |
22 |
22 |
|
10 |
10 |
#8 |
1.000 |
45M |
1500 |
25 |
25 |
|
11 |
11 |
#9 |
1.125 |
55M |
2500 |
29 |
29 |
|
12 |
12 |
#10 |
1.250 |
|
|
32 |
32 |
|
14 |
14 |
#11 |
1.375 |
|
|
35 |
35 |
|
16 |
16 |
#12 |
1.500 |
|
|
38 |
38 |
|
18 |
18 |
#13 |
1.825 |
|
|
41 |
41 |
|
20 |
20 |
#14 |
1.750 |
|
|
44 |
44 |
|
22 |
22 |
#15 |
1.875 |
|
|
48 |
48 |
|
25 |
25 |
#16 |
2.000 |
|
|
51 |
51 |
|
28 |
28 |
#18 |
2.250 |
|
|
57 |
57 |
|
32 |
32 |
|
|
|
|
|
|
|
36 |
36 |
|
|
|
|
|
|
|
40 |
40 |
|
|
|
|
|
|
|
44 |
44 |
|
|
|
|
|
|
|
50 |
50 |
|
|
|
|
|
|
It is important to note that the finest quality Inconel 825 round bar suppliers offer a variety of shapes, such as Square Bars, Hexagonal Bars, Flat Bars, Channels, and Hollow Bars.
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
| Inconel UNS N08825 Cold Drawn and Polish Round Bar | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
| alloy 825 Cold Drawn and Ground Bar | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
| 825 Incoloy Peeled and Polished Round Bar | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
| Inconel Alloy 825 Peeled and Ground Bar | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Standard lengths of Inconel 825 bars are 2000 mm to 8250 mm. Custom cuts are available (tolerances +2/-0 mm).
Incoloy 825 Round Bar Lengths
- Metric system: standard length is 9 – 12 meters
- USA: 40 feet
Inconel Alloy 825 Round Bar Tolerances
A Cold Drawn 825 Incoloy Alloy Round Bar Tolerances (BS 970-3) and a Steel Hexagon Tolerance (BS 970-3)
|
Tolerances for Cold Drawn Inconel 825 Round Bar |
||
|
Shape / Section |
Size, diameter, or width across flats |
Permitted variation |
|
mm |
mm |
|
|
Round |
≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to – 0.070 + 0 to – 0.085 + 0 to – 0.100 + 0 to – 0.120 + 0 to – 0.140 |
|
Flat (thickness) |
< 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to – 0.110 + 0 to – 0.130 + 0 to – 0.250 + 0 to – 0.350 |
|
Flat (width) |
< 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to – 0.110 + 0 to – 0.130 + 0 to – 0.160 + 0 to – 0.190 + 0 to – 0.220 + 0 to – 0.350 + 0 to – 1.00 + 1.00 to – 1.00 |
|
Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to – 0.090 + 0 to – 0.110 + 0 to – 0.130 + 0 to – 0.160 + 0 to – 0.250 |
Tolerances of Turned Incoloy 825 Round Bar (BS 970-3)
| Turned Inconel 825 round bar Tolerances | |
| Inconel 825 round bar Size, diameter | Permitted variation |
| mm | mm |
|
≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to – 0.070 + 0 to – 0.085 + 0 to – 0.100 + 0 to – 0.120 + 0 to – 0.140 + 0 to – 0.160 + 0 to – 0.185 + 0 to – 0.210 + 0 to – 0.230 + 0 to – 0.250 |
Tolerances of Precision Inconel WERKSTOFF NR. 2.4858 Round Bar (BS 970-3)
| Precision Incoloy 825 Round Bar Tolerances | ||||
| Section |
Size, diameter |
Permitted overall variation | ||
| Class A | Class B | Class C | ||
| mm | mm | mm | mm | |
| Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
Tolerance of Incoloy 825 Round Bar (BS EN ISO 286-2)
|
Inconel 825 round bar Tolerance ISO “H” Series in MM |
||||||||
|
NOMINAL SIZE |
h5 |
h6 |
h7 |
h8 |
h9 |
H10 |
H11 |
h12 |
|
DIAMETER mm |
||||||||
|
~ to 3 |
+0.004/0 |
+0.006/0 |
+0.01/0 |
+0.014/0 |
+0.025/0 |
+0.04/0 |
+0.06/0 |
+0.1/0 |
|
over 3 to 6 |
+0.005/0 |
+0.008/0 |
+0.012/0 |
+0.018/0 |
+0.03/0 |
+0.048/0 |
+0.075/0 |
+0.12/0 |
|
over 6 to 10 |
+0.006/0 |
+0.009/0 |
+0.015/0 |
+0.022/0 |
+0.036/0 |
+0.058/0 |
+0.09/0 |
+0.15/0 |
|
over 10 to 18 |
+0.008/0 |
+0.011/0 |
+0.018/0 |
+0.027/0 |
+0.043/0 |
+0.07/0 |
+0.11/0 |
+0.18/0 |
|
over 18 to 30 |
+0.009/0 |
+0.013/0 |
+0.021/0 |
+0.033/0 |
+0.052/0 |
+0.084/0 |
+0.13/0 |
+0.21/0 |
|
over 30 to 50 |
+0.011/0 |
+0.016/0 |
+0.025/0 |
+0.039/0 |
+0.062/0 |
+0.1/0 |
+0.16/0 |
+0.25/0 |
|
over 50 to 80 |
+0.013/0 |
+0.019/0 |
+0.03/0 |
+0.046/0 |
+0.074/0 |
+0.12/0 |
+0.19/0 |
+0.3/0 |
|
over 80 to 120 |
+0.015/0 |
+0.022/0 |
+0.035/0 |
+0.054/0 |
+0.087/0 |
+0.14/0 |
+0.22/0 |
+0.35/0 |
|
over 120 to 180 |
+0.018/0 |
+0.025/0 |
+0.04/0 |
+0.063/0 |
+0.1/0 |
+0.16/0 |
+0.25/0 |
+0.4/0 |
|
over 180 to 250 |
+0.02/0 |
+0.029/0 |
+0.046/0 |
+0.072/0 |
+0.115/0 |
+0.185/0 |
+0.29/0 |
+0.46/0 |
Incoloy 825 Round Bars price list
|
|
Incoloy 825 Round Bar Stock
- ASTM B408 is the standard for Incoloy 825 round bars
- Stainless steel bars made from Incoloy ASTM B408 825
- UNS N08825 round bar
- A round bar made of Incoloy 2.4858
- A round bar made of Incoloy 825
- The ASTM B408 square bar made of Inconel 825
- The ASTM B408 825 standard for incoloy square bars
- Stainless steel square bar UNS N08825
- Incoloy Square Bars 2.4858
- A square bar made of Incoloy 825
- ASTM B408 Hollow Bar in Incoloy 825
- Bars of hollow incoloy ASTM B408 825
- UNS N08825 hollow bar
- 2.4858 Hollow Incoloy bars
- Bars made of hollow Incoloy 825
- ASTM B408 Incoloy 825 Hex Bar
- Hex bars made of Incoloy ASTM B408 825
- UNS N08825 hex bar
- Incoloy Hex Bars 2.4858
- A hex bar made from Incoloy 825
- ASTM B408 bright bars of Incoloy 825
- Bright bars made of incoloy according to ANSI B408-825
- UNS N08825 Bright Bar
- Incoloy Bright Bars 2.4858
- Incoloy 825 bright bar
- ASTM B408 Incoloy 825 Forged Bar
- Forged Incoloy Bars ASTM B408 825 A408 825
- UNS N08825 forged bar
- Bars forged from Incoloy 2.4858
- Bars of Incoloy 825 forged
Tensile Properties of Incoloy 825
Table 2 shows the typical tensile properties of materials at room temperature (this is not to be used in design. Consult the relevant specification of your material or product for design values).
|
Form |
Condition |
0.2% Proof of Stress MPa |
Tensile Strength MPa |
Elong % |
|
Tube |
Annealed |
440 |
770 |
35 |
|
Tube |
Cold drawn |
880 |
1000 |
15 |
|
Bar |
Annealed |
325 |
690 |
45 |
|
Plate |
Annealed |
340 |
660 |
45 |
|
Sheet |
Annealed |
420 |
760 |
39 |
Corrosion Resistance
There is no doubt that Incoloy 825 has outstanding corrosion resistance. Under reducing and oxidizing conditions, Incoloy 825 resists general corrosion, pitting and crevice corrosion, intergranular corrosion, and stress corrosion cracking. In addition to sulphuric and phosphoric acids, it is also useful for flue gases containing sulfur, sour gas, oil wells, and seawater.
Fabrication
Stainless steel is most easily cold formed, but Incoloy 825 can be hot worked as well. The temperature range should be between 870 – 1180°C for hot processing, finishing between 870 – 980°C for cold processing. The alloy is more readily cold formed than stainless steel for maximum corrosion resistance.
Machinability
Machineability is reasonably good for Incoloy 825, which is classed as a ‘C’ alloy.
Welding
GMAW (mig), GTAW (tig), SMAW (manual), and SAW are the most common techniques for welding the alloy. It should be noted that the joint must be clean to prevent contamination of the weld pool during welding.
Test Certificate
Certificate of laboratory testing from a government-approved laboratory.
Certificate of Manufacturer’s Testing.
The characteristics of Incoloy 825
- Excellent resistance to reducing and oxidizing acids
- Good resistance to stress-corrosion cracking
- Satisfactory resistance to localized attacks like pitting and crevice corrosion
- Very resistant to sulfuric and phosphoric acids
- Good mechanical properties at both room and elevated temperatures up to approximately 1000°F
- Permission for pressure-vessel use at wall temperatures up to 800°F
Features
- This material exhibits excellent corrosion resistance.
- An ability to withstand elevated temperatures for a long period of time.
- Resistance to carburization and oxidation.
- In addition to being very durable, the product is also very versatile.
- It is superior to other materials in terms of sulfation resistance.
Application Industry
- The Petrochemical Industry
- The chemical industry
- Industry of oil and gas
- Pulp and paper industry
- Power plant industry
- Industry of food processing
- Industry of the pharmaceuticals
- Industry of energy
- Industry of aerospace
Distrubution Network
