EN8M Round Bar
Table of Content
Alloy Steel EN-8M Round Bar, Welding Rod / Welding Wire EN8M, AISI 1040 Rectangular Bar, CrMo EN8M Wires Dealer in Mumbai, Alloy Steel EN8M Bright Bar, Alloy Steel EN8M Cold Heading Wire Manufacturer, AISI 1040 Rectangular Bar, EN8M Wires Manufacturer in Mumbai, AS 80M40 Round Bars and Wire, AS EN8M Round Bar Exporter, Chrome Moly EN8M Round Bar and Wire Manufacturer in Mumbai.
Carbon steel EN8 is a medium carbon and medium tensile steel that is hardened to improve strength over mild steel. In addition, EN8 carbon steel is readily machinable under any conditions.
The EN8 standard is also known as the 080M40 standard. Medium carbon steel that is unalloyed. An EN8 steel has a medium strength, good tensile strength, and a good corrosion resistance. Shafts, stressed pins, studs, keys, etc. 1040 AISI.
In general, EN8 steels are used in their untreated state as supplied. Induction processes can further surface-harden EN8 steels, resulting in components with enhanced wear resistance. The metallurgical structure of steel EN8 materials in their heat-treated forms is homogeneous, ensuring consistent machining properties.
Heat treatment results may still be good on sections larger than 65mm, but a fall-off in mechanical properties will be evident toward the center of the bar. Larger sizes of EN8 steel materials should therefore be supplied in the untreated condition, and any heat treatment should be applied after initial stock removal. Towards the core, this should improve mechanical properties.
Cold drawn or rolled forms are normally supplied. EN8 is widely used for applications which require better properties than mild steel without justifying the cost of alloy steel. With flame or induction hardening, EN8 produces a good surface hardness and moderate wear resistance. Stocked in bar form, EN8 can be cut to your specifications. We can also cut flame-cut plates to your desired sizes and normalize them. EN8 plates can be ground on a surface or on a precision grinding machine.
We are manufacturing range of EN8 Round Bars from prime quality billets and blooms. The range of products of EN8 Round Bar which we offer to our customers are of high quality and these round bars are used for making machineries and OEM Auto components. These products have been made keeping in mind the quality parameters which have been set by the industry in the market. That said EN8 Steel Round Bars are always sEN8 plates can be surface ground or precision groundntity as well as retail quantity as per customers requirements. Carbon Steelround bars are supplied by us to various industries. EN8 Steel Bars – 080M40 – An unalloyed medium carbon steel, with good tensile strength
Carbon steel is classified as EN8 Steel – SAE-AISI 1040. Medium carbon steel EN8 (BS 970 080m40) is an unalloyed steel with good tensile strength. The EN8 steel is suitable for a wide range of engineering applications, including shafts, studs, bolts, connecting rods, screws, and rollers that require a high level of strength. EN8 round bars are easily welded, formed, and machined.
Tronixalloy.com manufactures, stocks, and supplies a wide variety of round bars and rods. Carbon Steel Bright Bars and Rods are produced in a variety of shapes and sizes so that we can meet the needs and desires of industries. Our EN 8 Hex and Flat Bars are manufactured following the industry’s quality parameters. Quality and excellent features make these Square Bars stand out from the rest.
In engineering, EN8M refers to a medium carbon steel that is commonly used to manufacture shafts, gears, and bolts that are commonly used in engineering applications. It has good strength and wear resistance properties, and is easily machinable. It is also readily machinable. The EN8M steel is similar to the EN8 steel but it has improved mechanical properties as a result of the addition of microalloying elements to the steel.
In engineering and manufacturing, round bars made from EN8M steel are commonly used in a variety of applications. As well as being available in a variety of sizes, they can also be utilized in a variety of industries, such as automotive, construction, and machinery manufacturing.
It is possible to supply EN8M round bars in a variety of conditions, such as hot rolled, cold drawn, or peeled and polished, depending on the application for which they are required. Typically, they are supplied in lengths ranging from 3 to 6 meters and can be cut to the length you require in order to meet your needs.
It has a high tensile strength and good toughness, which makes EN8M round bars a good choice for applications which require high strength and durability, since they have a high tensile strength and good toughness. In addition to this, they can also be heat treated to increase their hardness and wear resistance.
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.
Specification of EN8M Round Bar
Rank | Round carbon steel bars EN-8 |
Size of square bars | From 4mm to 100mm |
Tubes with hollow insides | OD: 32mm x ID: 16mm to OD: 250mm x ID: 200mm) |
Dimensions of hex bars | A/F 2-100mm |
Size of angle bars | 3/36*20mm*20mm~12mm*100mm*100mm |
Size of rectangles | From 33x30mm to 295x1066mm |
Size of flat bars | 2 – 100 mm in thickness |
10mm to 500mm in width | |
Bar channel | A section of 80 x 40mm to 150 x 75mm with a thickness of 5.0 to 6.0mm |
Part | Thicknesses of 3.0 to 12.0mm |
Dimensions | Three-sided 800mm diameter |
Size of the bill | Diameters from 1/2″ to 495mm |
Dimensions standard |
Height / Diameter: Rod and Bar Sizes of EN-8 Round Bar: 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inch / 1.125 inch / 1.25 inch / 1.375 inch / 1.5 inch / 1.75 inch / 2.0 inch / 2.25 inch / 2.5 inch / 2.75 inch / 3.0 inch / 3.25 inch / 3.75 inch / 4.0 inch / 4.25 inch / 4.5 inch / 5.0 inch / 5.25 inch / 5.5 inch / 6.0 inch / 7.25 inch / 8.0 inch / 9.0 inch and so on. |
Isosurfaces | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasted Finished, Polished, Hairline |
Intolerance | HT8, HT9, HT10, HT11, HT12, HT13, HT10, HT11, HT12 or according to client’s need |
Methodology | Hot Rolled, Cold Drawn, Cold Rolled, Forged EN-8 Round Bars |
Symptoms | Anodized, hardened, and tempered |
Complete the task | Drawing (bright), centreless grinding, hot rolling, turning, peeling, slit rolled edge, hot rolling annealing, rough turning, polishing, grinding, centerless grinding, and blacking |
Arrangement | En-8 Round Bar Round, Rod, T-Bar, EN-8 steel Channel Bar, Precision Ground Bar, EN-8 Carbon Steel Flat Bar, EN-8 Carbon Steel Square Bar, CS EN-8 Blocks, EN-8 Round Rod, EN-8 CS Rings, EN-8 Steel Hollow, EN 8 Steel Grade Triangle, Rectangle, Hex (A/F), CS EN-8 Threaded, Half Round Bar, Profiles, Steel Grade EN 8 Billet, EN-8 steel Ingot, I/H Bar, Forging, EN-8 steel Forging. |
Input/output | 650mm bar cutting |
Cemical Compistion of EN8M Round Bar
Silicon |
0.10-0.40% |
Carbon |
0.36-0.44% |
Manganese |
0.60-1.00% |
Sulphur |
0.050 Max |
Phosphorus |
0.050 Max |
Chromium |
– |
Molybdenum |
– |
Nickel |
– |
Mechanical Properties & Hardness of EN1A M Round Bar
Heat Treatment |
Tensile Strength Rm |
Yield Strength Rm |
Rp 0.2 |
A min on |
Impact |
Hardness |
|
5.65√So |
Izod Ft.lb |
KCV J |
|||||
MPa |
MPa |
MPa |
|
|
|
HB |
|
N |
550 |
280 |
– |
16 |
15 |
16 |
152/207 |
510 |
245 |
– |
17 |
– |
– |
146/197 |
|
Q |
625/775 |
385 |
355 |
16 |
25 |
28 |
179/229 |
R |
700/850 |
465 |
450 |
16 |
25 |
28 |
201/255 |
Physical Properties of EN8M Round Bar
Characteristics |
Measurement |
Aristocratic |
Intensity |
7.85 g/cm3 |
0.284 lb/in3 |
Equivalent Grade of EN8M Round Bar
EN8 steel is equivalent to other steel grades in ASTM, DIN, and JIS standards
BRITISH BS 970:1991 |
080M40, 080A42 |
BRITISH BS 970:1955 |
EN8, EN8D |
AISI / ASTM A29 |
1038, 1040, 1045 |
DIN Werkstoff No. |
1.0511, 1.1186, 1.1189 |
BS & DIN European |
C40, CK40, C45, CK45 |
JIS G4051 |
S40C, S45C |
AISI / SAE |
1040, 1042 |
EN |
EN8 |
BS |
080A40 |
Steel Number |
Steel Name |
Grade |
AISI/SAE |
BS 970 1983 |
1.0511 |
C40 |
En8 |
1040 |
080M40 |
BS 970 1991 |
BS 970 1955 EN |
AISI/SAE |
Werkstoff |
080M40 |
EN8 |
1040 |
1.1186 |
080A42 |
EN8D |
1042 |
– |
Condition of Steel EN8M Round Bar
H&T |
Tempered and hardened. |
ANN |
Anodized |
PH |
Hardened precipitation. |
CS EN-8 Hex Bars and Rods surface finish
CG |
Ground without a center |
HF |
Finished in hot water |
CF |
Finished cold |
HRAP |
Pickled and annealed hot rolled steel |
CD |
Drawn cold |
P |
Refined |
BD |
Drawn in bright colors |
SRE |
Rolled edge with a slit |
P&T |
Turned and peeled |
RT |
Turned/peeled rough |
ST |
Turned smoothly |
PR |
Reeled and peeled |
Round Bar Size & Types of EN8M
Type |
SIZES (mm) |
SIZES (Inches) |
ISO Tolerance |
Cold Drawn and Ground |
10.00 – 75.00 |
5/6″ – 2.50″ |
h8-h9-h10-h11 |
Peeled and Polished |
40.00 – 150.00 |
1.50″ – 6.00″ |
h11, h11-DIN 1013 |
Peeled and Ground |
20.00 – 50.00 |
3/4″ – 2.00″ |
h9-h10-h11 |
Cold Drawn and Polish |
3.00 – 75.00 |
1/8″ – 3.00″ |
h8-h9-h10-h11 |
En-8 Round Bar Bars are available in standard lengths from 2000 mm up to 6000 mm. Sizes can be cut to order (tolerance +2/-0mm).
5.0 |
45.0 |
6.0 |
50.0 |
7.0 |
55.0 |
8.0 |
60.0 |
9.0 |
65.0 |
10.0 |
70.0 |
12.0 |
75.0 |
16.0 |
80.0 |
20.0 |
90.0 |
25.0 |
100.0 |
30.0 |
130.0 |
35.0 |
160.0 |
40.0 |
200.0 |
-
Round Bar SW 13 EN-8
-
Round Bar SW 17 EN-8
-
Round bar SW 19 EN-8
-
Round Bar EN-8 SW 24
-
EN-8 Round Bar SW 27
EN-8 CS suppliers offer a variety of shapes, such as round bars, square bars, hexagonal bars, flat bars, channels and hollow bars.
Round Bar Stock of EN8M
In India, we offer the widest range of EN-8 Carbon Steel Round Bars:
With an extensive inventory for industrial and commercial applications, Tronixally.com is India’s largest stockist and supplier of EN-8 CS.
Rectangular carbon steel bars EN-8 |
EN-8 Carbon Steel Flat Bars ASTM |
T-bar made of En8 stainless steel |
Rounds made of stainless steel En8 |
Square bars made from carbon steel en 8 |
EN-8 Half-Round Bar in Carbon Steel |
Round carbon steel bars of EN 8 grade |
Hexagonal bars made from EN8 alloy steel |
EN-8 Threaded Bar in Carbon Steel |
EN 8 carbon steel rebar |
EN8 stainless steel hollow bars |
Carbon Steel EN-8 Precision Ground Bar |
CS EN-8 Precision Ground Stock |
Triangle bar made from ASTM Carbon Steel EN-8 |
Rods made to JIS EN-8 |
Hex bar made from EN8 alloy steel |
Hexagonal bars made of carbon steel |
Forged CS EN-8 bar |
En8 stainless steel round bar |
Round rods ASTM En8 |
EN-8 Bright Bar from CS |
Black bar according to JIS EN-8 CS |
Bars made of EN8 steel billets |
Ingot CS EN-8 |
Carbon steel spring steel bar EN-8 |
Forged round bars in accordance with ASTM EN8 |
Threaded bar ASTM En8 |
Cold drawn and polished square bars in EN-8 carbon steel |
Cold drawn en 8 carbon steel bars |
Hot Forged Round En8 Steel Bars Cold Rolled |
Hot forged EN-8 carbon steel round bars |
Polish bars made of carbon steel EN 8 |
Polished round bar made from EN8 alloy steel |
En8 Hollow Bar in Bright Alloy |
Black surface round bar made of EN8 steel |
A carbon steel round bar for shafts made from EN-8 |
AISI EN-8 Round Bars with Large Diameters |
A flat bright round bar made of EN8 stainless steel |
A solid round alloy En8 bar with a diameter of 20mm |
Round bars made of En 8 Grade Carbon Steel cold drawn |
An EN 8 RCS bar made of carbon steel |
Round Alloy En8 bars hot rolled |
Round bar made from half alloy En8 |
AISI EN-8 round bar with bright black surface |
Bars with threads |
Polished & Cold Drawn Square Bars |
Bars made by RCS |
Round bars that have been hot rolled |
Bars with half rounds |
Round bar with a bright black surface |
Round bars with a large diameter |
Bright round bar with a flat surface |
Bars with half rounds |
Round bar with a bright black surface |
Round bars with a large diameter |
Bright, flat round bar |
In India, we manufacture and export EN-8M Round Bars that are cold (bright) drawn, centerless ground, hot rolled, smooth turned, peeled, slit rolled edged, and hot rolled annealed.
EN8M: Why Should You Buy It From Us?
-
Providing EN8d bars and rods manufactured in state-of-the-art facilities.
-
Engineers and professionals qualified to deliver EN 8 Round Bars in accordance with international standards.
-
Our Mild Still EN8 Round Bars are finished with sophisticated machinery.
-
Distributing En8 Hex Bars cost-effectively through strong market networks.
-
Documents related to self-inspection.
-
En8 Bright Bars are 100% committed to quality and delivery.
-
Test certificates for raw materials.
-
Efforts are being made to reduce lead times.
-
Investing more and keeping up with technology advances.
Features of Din.1.0511 EN8M
-
Finishing that is optimal
-
Resistance to corrosion
-
Stability and hardness in terms of dimensions
-
Strengthens yields
EN8M vs MS Material Differences.
Compared to MS material, EN 8 M has a higher tensile strength. Material EN 8 M is suitable for high strength, while material MS is not suitable for high strength. There is a significant price difference between EN 8 M and MS materials. It is possible to use EN 8 M material instead of MS material, but MS material cannot be used instead of EN 8 material.
EN8M & EN8D: What’s the difference.
EN8M is a medium carbon steel that has been through-hardened. It is used to manufacture axles, shafts, gears, studs, bolts, etc., and is easily machinable. EN8D has enhanced wear resistance and is a carbon steel. By induction processes, it is a surface-hardened version of EN8M. General engineers and automobile components can benefit from it.
EN8M or ENG is better.
While EN9 has a lower wear rate in rotating parts than EN-8M, EN8M is an unalloyed medium carbon steel with rational tensile strength. EN8M is widely used for applications which needs better properties compared to mild steel but does not justify the costs of an alloy steel. EN9 is general engineering applications including blades for axes, knives, sickles as well as shafts, bushes, wood working drills, crankshafts, and screws.
Manufacturer of EN8M Round Bar Billets & Blooms in India.
Bars EN-8 Round Bar Bars |
Billets for EN-8 round bars |
Blooms for EN-8 round bars |
Rods made from EN-8 round bar |
EN-8 rolled carbon steel bars |
Billets made of EN-8 carbon steel |
Blooms made of carbon steel EN-8 |
Rods rolled to JIS EN-8 CS |
Hot rolled carbon steel bars EN-8 |
Hot Rolled Billets in Carbon Steel EN-8 according to ASTM |
Blooms made from hot-rolled ASTM carbon steel EN-8 |
Rods made of carbon steel EN-8 that have been hot rolled |
Cold Rolled ASTM Carbon Steel EN-8 Bar |
Cold Rolled EN-8 Carbon Steel Billets |
Cold Rolled Carbon Steel EN-8 Blooms |
Cold Rolled JIS EN-8 CS Rods |
Forged EN-8 carbon steel bars |
Forged billets made of EN-8 carbon steel |
Forged stainless steel blooms in EN8 |
Forged rods made of carbon steel EN-8 |
Bars of EN-8 carbon steel continuously cast |
Billets made of carbon steel EN-8 continuously cast |
Continuous cast blooms according to ASTM En8 |
Concast rods made of stainless steel EN8 |
Annealed EN-8 carbon steel bars |
Annealed carbon steel billets EN-8 |
Blooms annealed to JIS EN-8 CS |
Rods annealed to ASTM En8 |
Normalized stainless steel bar EN8 |
Billets made of carbon steel EN-8 |
Normalized blooms of carbon steel EN-8 |
Rods normalized to JIS EN-8 CS |
ASTM En8 Quenched & Tempered Bar |
Billets made of EN-8 carbon steel that have been quenched and tempered |
Blooms made of carbon steel EN-8 quenched and tempered |
Rods made of En8 stainless steel that have been quenched and tempered |
Carbon steel EN-8 bars that have been hardened and tempered |
Hardened and Tempered En8 Stainless Steel Billets |
Carbon steel blooms hardened and tempered to EN-8 |
Carbon steel EN-8 rods that have been hardened and tempered |
Black bar according to JIS EN-8 CS |
Black ASTM En8 Billets |
Black blooms made from carbon steel EN-8 |
Black rods made of EN-8 carbon steel |
EN-8 Carbon Steel Bright Bar |
Billets made of carbon steel EN-8 |
EN-8 Bright Blooms made of carbon steel |
A bright rod made of stainless steel EN8 |
Peeled bar according to JIS EN-8 CS |
Peeled carbon steel billets EN-8 |
Blooms peeled from AISI EN-8 |
Peeled EN-8 carbon steel rods |
Hollow bar CS EN-8 |
Hollow Billets ASTM Carbon Steel EN-8 |
The hollow blooms of CS EN-8 |
Hollow rods in accordance with ASTM En8 |
Hollow ring bars made of ASTM Carbon Steel EN-8 |
Hollow ring billets CS EN-8 |
Hollow ring blooms made of EN8 steel |
Hollow ring rods EN-8 from CS |
Circular bars according to ASTM EN8 |
Circular Billets ASTM Carbon Steel EN-8 |
Circular blooms made from ASTM Carbon Steel EN-8 |
Circular steel rods made from EN8 steel |
Circular steel bars made of alloy steel EN8 |
Circular Billets ASTM Carbon Steel EN-8 |
Circular blooms made from ASTM Carbon Steel EN-8 |
Circular rods made of alloy steel EN8 |
Hollow ring bar made of carbon steel EN-8 as per ASTM standards |
Hollow ring billets made of alloy steel EN8 |
Hollow ring blooms made of alloy steel EN8 |
Hollow ring rods for CS EN-8 |
An arc of circles |
Steel Circular Billets – EN8 |
Circular Blooms made from EN8 steel |
Rods in a circular shape |
Hollow ring bar CS EN-8 |
Billets with hollow rings |
The hollow ring blooms |
Hollow ring rods made of ASTM Carbon Steel EN-8 |
Advantages & Packaging of EN8M Round Bars
Packaging types include:
Hexagonal bundles
Boxes made of wood
Steel/wooden crates
Packaging for Alloy Steel EN8 Round Bar according to customer specifications
Aspects:
Strengthens
High mechanical stress resistance
High temperature resistance
Formality is important