Twitter

Facebook

Instagram

317L Round Bar

Stainless Steel 420 Plate

Table of Content

Shop Our Large Selection of SS 420 Plate, AISI 420 Plate, SUS 420 Plate , 2B Finish 420 Stainless Steel Plate, AISI Hot Rolled 420 Stainless Steel Plate, Hairline Mirror Polished 420 Stainless Steel Plate, UNS S42000 Plates, Mirror finished stainless steel 420 Plate in Various Widths

Distributors & Exporters Of ASTM A240 Stainless Steel 420 Plate, ASTM A240 420 Stainless Steel Plate, UNS S42000 Plate, Din 1.4021 Plate, SS 420 Perforated Plate, Stainless Steel 420 Plate Cut To Size, Stainless Steel 420 Shim Plate, Cold Rolled 420 stainless steel Plate, inox sus 420 stainless steel Plate Traders. Compare Price of SS 420 Plate.

    Tronixalloy is a leading distributor, stockist, and supplier of stainless steel sheets in grade 420 stainless steel in all finishes. We are suppliers of Stainless Steel 420 Plate to Jindal Stainless Ltd., POSCO, DKC- Korea, European Mills, NTK- Japan, TISCO, Aperam, and others. 420 Stainless Steel Sheets are available in narrow and wide widths.

    Paradoxically (Steel Plates, Sheets and Coils Division) is a leading stockholder, supplier, and exporter of Stainless Steel 420 Plates. Our custom lengths and widths can reach 2000 mm. Exports are our specialty! We can source many hard-to-find grades and non-standard sizes.

    The corrosion resistance of stainless steel 420 plates is well known. It is similar to the stainless steel 410, but it is more robust and more complex. Stainless Steel 420 Plate retains its magnetic properties both when annealed and hardened. This one is the most corrosion-resistant when fully set. The stainless Steel 420 Plate can be stiffened by cold working or heat treatment. Heat treatment can achieve a minimum HRC 51 hardness.

    Stainless steel 420 plates are one of the most vital grades available. It has a tensile strength of around 586 MPa after annealing. As a result of hardening and stress relief, its tensile strength increases to about 1586 MPa. A UNS S42000 Sheet can effectively resist corrosion in acidic and alkaline environments. However, the material needs to stand up better to flex and impact.

    The Hot Rolled 420 Stainless Steel Plate meets the minimum chromium requirements as a food grade. Therefore, it is a common food-safe stainless steel grade.

    Din 1.4021 Sheet makes shear blades, needle valves, surgical equipment, and others. Food-safe, it is also used to make cutlery. As a result of being fully hardened or hardened and stress relieved, cold rolled 420 stainless steel plate exhibits enhanced corrosion resistance. The properties of this grade are similar to those of 410. Hardening produces chromium carbide residue, which increases wear resistance. As the alloy reaches 427 degrees C, its properties change, such as rapid softening and reduced corrosion resistance.

    420 alloy is available in various dimensions, shapes, and sizes and can be customized according to the client’s requirements. Depending on the needs, surface finishes can also be customized. 2B finished 420 Grade stainless steel plate increases corrosion resistance while Mirror finished 420 Grade stainless steel sheet enhances appearance.

    How Do 420 Stainless Steel Sheets Work?

    Heat treatment can harden 420 stainless steel, a martensitic, higher carbon version of 410 and 416 stainless. 420 contains at least 12 percent chromium, sufficient for corrosion resistance.

    In thicknesses ranging from 0.3mm to 120mm, Tronixalloy.com manufactures and exports stainless steel 420 sheets, stainless steel 420 plates, and stainless steel 420 coils. They are used extensively in a variety of industries. For designing stainless steel sheets, leaves, and rings, we also offer Stainless Steel 202 Sheets, 304 Stainless Steel Sheet, 316 Stainless Steel Sheet, 321 Stainless Steel Sheet, 410 Stainless Steel Sheet, 420 Stainless Steel Sheet, and 416 Stainless Steel Sheet.

     

    Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Stainless Steel 420 Plate Specification

    Item

    Stainless Steel 420 Plate(Hot rolled, cold rolled)

    Standard

    ASTM A240, JIS4304-2005, ASTM A167, EN 10088-2-2005, GB/T3280-2007, etc

    Material

    Stainless Steel 420 Plate

    Surface

    the surface and finish of Stainless Steel 420 Plate:

    2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hair line, sand

    blast, Brush, etching, etc

    Thickness

    0.3mm~200mm

    Width

    1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

    Length

    2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

    Brand:

    Indian Origin, European Origin, Japanese Origin, US Origin, Korea Origin, Thailand Origin, Taiwan Origin

    Manufacturer:

    POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrupp, Baosteel, TISCO, ArcelorMittal, VDM, Nippon Metal, Outokumpu

    Package

    Standard export package, suit for all kinds of transport, or as

    required.

    Export to

    Indonesia, Malaysia, Singapore , Saudi Arabia, Qatar , UAE, Iran, Iraq, Oman, South Africa, Nigeria, Kenya, Italy, UKv

    Stainless Steel 420 Plate Chemical Composition 

    Grade C Mn Si P S Cr Ni
    420

    0.15

    max

    1.00

    max

    1.00

    max

    0.04

    max

    0.03

    max

    min: 12.0

    max: 14.0

    Stainless Steel 420 Plate Mechanical Properties 

    Tempering Temperature (°C) Tensile Strength (MPa)

    Yield Strength

    0.2% Proof (MPa)

    Elongation

    (% in 50mm)

    Hardness Brinell

    (HB)

    Annealed * 655 345 25 241 max
    399°F (204°C) 1600 1360 12 444
    600°F (316°C) 1580 1365 14 444
    800°F (427°C) 1620 1420 10 461
    1000°F (538°C) 1305 1095 15 375
    1099°F (593°C) 1035 810 18 302
    1202°F (650°C) 895 680 20 262
    Condition A of ASTM A276 specifies annealed tensile properties and annealed hardness.

    Physical Properties Of 420 Stainless Steel Sheet:

    Grade Density (kg/m3) Elastic Modulus (GPa)

    Mean Coefficient of Thermal Expansion

    (μm/m/°C)

    Thermal Conductivity

    (W/m.K)

    Specific Heat 0-100°C

    (J/kg.K)

    Electrical Resistivity (nΩ.m)
    0-100°C 0-315°C 0-538°C at 100°C at 500°C
    420 7800 200 10.3 10.8 11.7 24.9 460 550

    Stainless Steel 420 Plate Chemical Composition 

    Grade C Mn Si P S Cr Ni
    420

    0.15

    max

    1.00

    max

    1.00

    max

    0.04

    max

    0.03

    max

    min: 12.0

    max: 14.0

    Stainless Steel 420 Plate Mechanical Properties 

    Tempering Temperature (°C) Tensile Strength (MPa)

    Yield Strength

    0.2% Proof (MPa)

    Elongation

    (% in 50mm)

    Hardness Brinell

    (HB)

    Annealed * 655 345 25 241 max
    399°F (204°C) 1600 1360 12 444
    600°F (316°C) 1580 1365 14 444
    800°F (427°C) 1620 1420 10 461
    1000°F (538°C) 1305 1095 15 375
    1099°F (593°C) 1035 810 18 302
    1202°F (650°C) 895 680 20 262
    Condition A of ASTM A276 specifies annealed tensile properties and annealed hardness.

    Physical Properties Of 420 Stainless Steel Sheet:

     

    Grade Density (kg/m3) Elastic Modulus (GPa)

    Mean Coefficient of Thermal Expansion

    (μm/m/°C)

    Thermal Conductivity

    (W/m.K)

    Specific Heat 0-100°C

    (J/kg.K)

    Electrical Resistivity (nΩ.m)
    0-100°C 0-315°C 0-538°C at 100°C at 500°C
    420 7800 200 10.3 10.8 11.7 24.9 460 550

    MACHINABILITY

    • Chip buildup that is tough and stringy.
    • Machining some high-carbon tool steels is similar

    WELDING

    • Due to its air-hardening characteristics, this material is not commonly welded.
    • After preheating to 300-400 degrees F, welding can be performed
    • Two hours of post-weld tempering at a temperature

    HOT WORKING

    • It is recommended to raise temperatures to 1400 degrees Fahrenheit gradually, then 2000-2200 degrees Fahrenheit.
    • After furnace work, let the furnace cool slowly to prevent cracking
    • Maintaining a working temperature above 1600 degrees Fahrenheit requires reheating.

    COLD WORKING

    • Hard work can only be tolerated to a limited extent.
    • Cracking will result from radical forming operations.

    ANNEALING

    • The annealing temperature should be 1550-1650 F (843-900 C)
    • Cool the furnace slowly.

    TEMPERING

    • Temperatures between 300 and 400 degrees Fahrenheit
    • Hardness and corrosion resistance are maximized by air cooling.

    The hardening process

    • Quench in heated oil at 1850-1950 degrees Fahrenheit.

     

    ABRASION RESISTANCE:

    • In comparison to austenitic grades and 17% chromium ferritic alloys, this alloy is less resistant
    • The hardened condition provides good resistance to the atmosphere, foods, fresh water, and mild acids
    • As a result of annealing, resistance is reduced
    • Smooth surfaces are best

    HEAT RESISTANCE:

    • Mechanical properties will be reduced above the relevant tempering temperature
    • The scaling temperature is approximately 1202oF (650oC).

     

    • Equivalent Grades Stainless Steel 420 Plate

      STANDARD WERKSTOFF NR. UNS
      Stainless Steel 420 Plate 1.4007 S42000

      What Are 420 Stainless Steel Sheets?

      420 stainless steel is a martensitic, higher carbon version of 410 and 416 stainless that can be hardened by heat treatment. A minimum of 12 percent chromium is present in 420, which is sufficient to provide corrosion resistance.

      Tronixalloy.com manufactures and exports stainless steel 420 sheets, stainless steel 420 plates, and stainless steel 420 coils in thicknesses ranging from 0.3mm to 120mm. Various industries have found extensive use for them. Additionally, we supply Stainless Steel 202 Sheet, 304 Stainless Steel Sheet, 316 Stainless Steel Sheet, 321 Stainless Steel Sheet, 410 Stainless Steel Sheet, 420 Stainless Steel Sheet, and 416 Stainless Steel Sheet for designing stainless steel sheets, plates, and coils.

    • Processing Of Stainless Steel 420 Plate

      Tronixalloy.com offers the following processing for Stainless Steel 420 Plate:

      • 420 Stainless Steel sheet Testing
      • 420 Stainless Steel sheet Cutting
      • 420 Stainless Steel sheet Grinding
      • 420 Stainless Steel sheet Forming Drilling/ Machining

       

      Other Available Products Of Stainless Steel 420 Plate

      • Stainless Steel SUS 420 Plates

      • ASTM A240 Stainless Steel 420 Plates
      • JIS SS 420 2B Finish Plates Manufacturer
      • Stainless Steel 420 No.4 Finish Plates
      • Stainless Steel 420 Plates Manufacturer
      • 420 Stainless Steel Mirror Plates
      • ASTM A240 SS UNS S42000 2D Finish Plates
      • UNS S42000 SS Colled Rolled Plates Distributors
      • Stainless Steel UNS S42000 Ring
      • Stainless Steel UNS S42000 Plates Exporter
      • ASME SA240 SS UNS S42000 HR Plates
      • UNS S42000 SS Circle Exporter
      • UNS S42000 SS Foils
      • Stainless Steel 420 2D Finish Plates
      • Stainless Steel SUS 420 2D Finish Plates
      • SS ASME SA240 Steel 420 Cold rolled Plates 
      • Stainless Steel 420 Plates Exporter
      • SS 420 Hot Rolled Stainless Steel Plate
      • DIN 1.4007 SS 2B Finish Plates
      • DIN 1.4007 SS No.4 Finish Plates
      • Stainless Steel DIN 1.4007 Plates Suppliers
      • DIN 1.4007 SS A240 #8 Finish Plates Suppliers
      • DIN 1.4007 Stainless Steel SA240 Plates
      • AISI SS 420 Hot Rolled (HR) Plates
      • AISI SS 420 Mirror Plates
      • DIN 1.4007 SS 2B Finish Plates Exporter

      Application of Stainless Steel 420 Plate

      • Stainless Steel 420 Plate Used in Tractor

      • Stainless Steel 420 Plate Used in Automotive Trim
      • Stainless Steel 420 Plate Used in Stamped Machined Products
      • Stainless Steel 420 Plate Used in Cookware
      • Stainless Steel 420 Platet Used in Appliances
      • Stainless Steel 420 Plate Used in Kitchen
      • Stainless Steel 420 Plate Used in Foodservice Equipment
      • Stainless Steel 420 Plate Used in Sinks
      • Stainless Steel 420 Plate Used in Railway Cars
      • Stainless Steel 420 Plate Used in Trailers

       

      Stainless Steel 420 Plate Processing

      Tronixalloy.com offers the following processing for Stainless Steel 420 Plate:

      • 420 Stainless Steel sheet Testing
      • 420 Stainless Steel sheet Cutting
      • 420 Stainless Steel sheet Grinding
      • 420 Stainless Steel sheet Forming Drilling/ Machining

      Packaging:

      We Tronixalloy.com ensure the best quality of Packing , because it plays an important role especially in the case of international shipments in which the consignment passes through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.

      Depending on the product, we pack our goods in a variety of ways. Our products are packed in a variety of ways, including:

      • Boxes and Crates
      • Shrink-wrapped
      • Carton boxes
      • Wooden pallets
      • Wooden boxes
      • Wooden crates

       

      Testings (Destructive, Non Destructive):

      • Positive Material Identification – PMI Testing

      • Chemical Analysis – Spectro Analysis
      • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
      • Micro Test
      • Macro Test
      • Hardness Test
      • Pitting Resistance Test
      • Intergranular Corrosion (IGC) Test
      • Flaring Test
      • Flattening Test
      • Hydrostatic Test
      • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
      • Sulphide Stress Corrosion Cracking (SSC), NACE TM 0177
      • Radiography Test
      • Dye Penetrant Test (DP Test)
      • UltraSonic Test (UT)
      • Eddy Current Testing
      • Impact Test
      • Bend Test

       

      Stainless Steel 420 Plate Weight Chart

      Plate Thick.

      (inch and mm)

      Plate Sizes

      Sheet Wght / Unit Area

      (lbs/ft² and kg/m²)

      Estimated Wght / Sheet

      (lbs and kg)

      0.015 , 0.381 36 x 96 0.630 , 3.07566 15.12 , 6.84936
      0.015 , 0.381 36 x 120 0.630 , 3.07566 18.90 , 8.5617
      0.0178 , 0.45212 36 x 96 0.756 , 3.690792 18.15 , 8.22195
      0.0178 , 0.45212 36 x 120 0.756 , 3.690792 22.68 , 10.27404
      0.0178 , 0.45212 48 x 96 0.756 , 3.690792 24.19 , 10.95807
      0.0178 , 0.45212 48 x 120 0.756 , 3.690792 30.24 , 13.69872
      0.0235 , 0.5969 30 x 96 1.008 , 4.921056 20.16 , 9.13248
      0.0235 , 0.5969 30 x 120 1.008 , 4.921056 25.20 , 11.4156
      0.0235 , 0.5969 36 x 96 1.008 , 4.921056 24.19 , 10.95807
      0.0235 , 0.5969 36 x 120 1.008 , 4.921056 30.24 , 13.69872
      0.0235 , 0.5969 36 x 144 1.008 , 4.921056 36.29 , 16.43937
      0.0235 , 0.5969 48 x 96 1.008 , 4.921056 32.26 , 14.61378
      0.0235 , 0.5969 48 x 120 1.008 , 4.921056 40.32 , 18.26496
      0.0235 , 0.5969 48 x 144 1.008 , 4.921056 48.39 , 21.92067
      0.0291 , 0.73914 30 x 96 1.260 , 6.15132 25.20 , 11.4156
      0.0291 , 0.73914 30 x 120 1.260 , 6.15132 31.50 , 14.2695
      0.0291 , 0.73914 36 x 96 1.260 , 6.15132 30.24 , 13.69872
      0.0291 , 0.73914 36 x 120 1.260 , 6.15132 37.80 , 17.1234
      0.0291 , 0.73914 36 x 144 1.260 , 6.15132 45.37 , 20.55261
      0.0291 , 0.73914 48 x 96 1.260 , 6.15132 40.32 , 18.26496
      0.0291 , 0.73914 48 x 120 1.260 , 6.15132 50.41 , 22.83573
      0.0291 , 0.73914 48 x 144 1.260 , 6.15132 60.49 , 27.40197
      0.0355 , 0.9017 30 x 96 1.512 , 7.381584 30.24 , 13.69872
      0.0355 , 0.9017 30 x 120 1.512 , 7.381584 37.80 , 17.1234
      0.0355 , 0.9017 36 x 96 1.512 , 7.381584 36.29 , 16.43937

       

      Dimensions of Stainless Steel 420 Plate

      Metric Dimensions

      Surface finish Thickness (mm) Width (mm)
      2B – heat treated, pickled, Cold rolled, skin passed 0.25–8.0 max. 2032
      2D – heat treated, pickled, Cold rolled 0.4–6.35 max. 1524
      2E – heat treated, mechanically descaled, Cold rolled 0.4–8.0 max. 2032
      2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
      2H – Work hardened 0.4–6.35 max. 1524
      Polished, brushed 0.5–4.0 max. 1524

      Imperial Dimensions

      Surface finish Gauge (in) Width (in)
      2B – heat treated, pickled, Cold rolled, skin passed 10–24 max. 72*
      2D – heat treated, pickled, Cold rolled 12–24 max. 60
      BA Mexinox only 18–28 max. 48
      Polished (not brushed) 11–24 max. 60
      Temper rolled Mexinox only 13–29 max. 48

       

      Stainless Steel 420 Plate Tolerance

      Thick.

      Tolerance

      Specified Width

      Equal To (millimeter) Less Than(millimeter) ≤ 1000 (millimeter) 1000< thru ≤ 1300 (millimeter) 1300 < thru ≤ 2100 (millimeter)
      .30 .50 ±.04
      .50 .60 ±.045 ±.05
      .60 .80 ±.05 ±.05
      .80 1 ±.055 ±.06 ±.06
      1 1.2 ±.06 ±.07 ±.07
      1.2 1.5 ±.07 ±.08 ±.08
      1.5 2.0 ±.08 ±.09 ±.10
      2.0 2.5 ±.09 ±.10 ±.11
      2.5 3 ±.11 ±.12 ±.12
      3 4 ±.13 ±.14 ±.14
      4 5 ±.14 ±.15 ±.15
      5 6.5 ±.15 ±.15 ±.16
      6.5 8 ±.16 ±.17 ±.17

       

      Stainless Steel 420 Plate Application Industries

      • Off-Shore Oil Drilling Companies
      • Power Generation
      • Petrochemicals
      • Gas Processing
      • Specialty Chemicals
      • Pharmaceuticals
      • Pharmaceutical Equipment
      • Chemical Equipment
      • Sea Water Equipment
      • Heat Exchangers
      • Condensers
      • Pulp and Paper Industry

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us