Twitter

Facebook

Instagram

317L Round Bar

Hastelloy C276 Round Bar

Table of Content

Hastelloy C276 Bar, ASTM B574 Hastelloy C276 Round Bars, Hastelloy WERKSTOFF NR. 2.4819 Round Bars , Hastelloy GOST ХН65МВУ Cold Drawn Round Bar, Hastelloy UNS N10276 Bright Bar

Suppliers of ASTM B574 Hastelloy C276 Hex Bar, C276 Hastelloy Alloy Forged Bars Exporter, C276 Alloy Black Bar, ASTM B574 Alloy C276 Threaded Bar, Alloy C276 Square Bar, Hastelloy C276 Hexagonal Bar, Hastelloy Alloy C276 Rods.

    Among the benefits of using Hastelloy C276 rods are their excellent corrosion resistance in both oxidizing and reducing environments. As a result of its high molybdenum and chromium content and the addition of tungsten to the alloy, 2.4819 Alloy C 276 is highly resistant to stress corrosion cracking caused by chlorine. As a result of these elements in the alloy, the ASTM B574 UNS N10276 is also resistant to general corrosion such as pitting and crevice corrosion.

    Hastelloy C276 Bar Stock can be used in environments that contain oxidative chemicals at temperatures up to 1900°F or 1038°C. In the presence of oxidative media containing environments such as hot, concentrated nitric acid, Hastelloy C276 Round Bar cannot function or provide good resistance due to its low chromium content. ASTM B574 N10276 has a low carbon content, preventing carbide precipitation, so it can be used in as-welded form.

    While Alloy C276 Round Bar cannot be hardened by heat treatment, it can be hardened by cold working. Compared to conventional austenitic stainless steels, Hastelloy C276 Hex Bar has a higher work hardening rate, so it is important to take that into consideration. As with conventional austenitic stainless steels and nickel-based alloys, Hastelloy C276 Flat Bar can easily be welded and processed in a shop using standard fabrication methods.

    When stainless steel, Alloy 400 and Alloy 625 fail under crevice conditions, the Hastelloy C276 Bar performs well in marine environments. The ASTM B574 N10276 is extensively used in sour wells for the recovery and processing of sour natural gas containing hydrogen sulphide, carbon dioxide and chlorides. Due to its chemistry, Hastelloy C276 resists stress cracking caused by sulphur in sour environments at high temperatures in deep wells. Due to their corrosive environment in deep wells, carbon and alloy steels tend to fail by succumbing to stress cracking or corrosion cracking due to sulfide.

    Troinxalloys.com is one of the leading suppliers and manufacturers of Hastelloy C 276 Round Bars, which are thick at 2050°F, rapid quenched, with an average Olsen cup depth of 0.48“. Round Bars made from HASTELLOY C-276 alloy can be forged, hot-upset, and impact extruded. For welding C276 alloy wrought and cast products, alloy C276 Bars are used as matching composition fillers, for dissimilar welding applications including nickel-chromium-molybdenum alloys and stainless steels, as well as for overlaying or cladding steels. 

    Whenever possible, parts hot-formed in HASTELLOY C-276 alloy Bars should be solution heat-treated before final fabrication or installation. Tests have shown corrosion rates of less than 5mpy (0.13 mm/y) at all temperatures below the boiling point and at concentrations lower than 65 wt% in HASTELLOY C-276 alloy Rods. In Alloy C276 Rods, boiling 45% magnesium chloride (ASTM Standard G 36) is often used to measure the resistance to this extremely destructive attack.

    Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Hastelloy C276 Round Bar Specification

    Specification ASTM B574, ASTM B574 UNS N10276 , NACE MR-01-75, ASME SB574 Bar Products, AMS 5750 (Hastelloy C, UNS N10002), Inconel C276 (trademark), Werkstoff Nr. 2.4819, ASTM B751, DIN 17744, DIN 17751, DIN 17750 and DIN 17752,VRC276
    Grade Hastelloy C276 – UNS N10276
    UNS N10276 Hex Bar size 2-100mm A/F
    ASTM B574 Hastelloy C276 Round bar size Diameter: 3-~C276mm
    ASTM B574 Hastelloy C276 Square bar size 4 to 100mm
    N10276 Flat bar size Thickness: 2 -100mm
    Width: 10 to 500mm
    Hastelloy C276 Rectangles Size 33 x 30mm to 295 x 1066mm
    ASTM B574 N10276 Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
    UNS N10276 Section 3.0 to 12.0mm thickness
    Hastelloy C276 AMS 5666 Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
    N10276 Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
    ASTM B574 N10276 Billet Size 1/2″ to 495mm Diameter
    Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
    Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
    Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished
    Condition Hardened & tempered, annealed
    Technique Hastelloy C276 Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod
    Processing Bar cutting to 650mm
    Form Hastelloy C276 Round, Welding Rod, T-Bar, Rod, Precision Ground Bar, Channel Bar, Square, Flat Bar, Blocks, Round Rod, Hollow, Rings, Rectangle, Hex (A/F), Triangle, Threaded, Profiles, Billet, Ingot, I/H Bar, Half Round Bar, Forging etc.
    Our stockyad location for fast delivery across India Hyderabad, Noida, Shivamogga, Pimpri-Chinchwad, Agra, Coimbatore, Chennai, Tiruchirappalli, Tirunelveli, Bhubaneswar, Mumbai, Pune, Bengaluru, Ahmedabad, Thiruvananthapuram, Dhanbad, Navi Mumbai
    Our Hastelloy C276 Round bar conforms to NACE MR0175/ISO 15156

     

     

    Hastelloy C-276 Chemical Composition

    (Ni) Nickel Remainder
    (Mo) Molybdenum 15.0 to 17.0
    (Cr) Chromium 14.5 to 16.5
    (Fe) Iron 4.0 to 7.0
    (W) Tungsten 3.0 to 4.5
    (Co) Cobalt 2.5 max
    (Mn) Manganese 1.0 max
    (V) Vanadium 0.35 max
    (Si) Silicon 0.08 max
    (P) Phosphorus 0.04 max
    (S) Sulfur 0.03 max
    (C) Carbon 0.010 max

     

    Hastelloy C-276 Mechanical Properties.

    Product Form Tensile (ksi) .2% Yield (ksi) Elongation %
    Bar 110.0

    >

    52.6

    62
    Plate 107.4 50.3 67
    Sheet 115.5 54.6 60
    Tube & Pipe 105.4 45.4 70

    Other Types Hastelloy C276 Round Bar

    Hastelloy C276 Round Bars Hastelloy C276 Round Rods Supplier
    Hastelloy UNS N10276 Bars Hastelloy Alloy NW NW 0276 Bars Exporter
    ASTM B574 C276 Hastelloy Alloy Black Bar Supplier C276 Hastelloy Polished Bar Distributor
    Alloy C276 Bars Supplier ASME SB574 Hastelloy C276 Bars
    UNS N10276 Bar Hastelloy C276 Black Bars
    Hastelloy DIN 2.4819 Round Bars Hastelloy C276 Forged Bar
    C276 Alloy Bars Exporter Hastelloy C276 Bright Bar
    WNR 2.4819 Hex Bars ISO Certified Hastelloy C276 Round bars
    C276 Hastelloy Black Bars C276 Hastelloy Threaded Bars
    Hastelloy Alloy Round Bars Exporter Hastelloy C276 Rectangle Bar Stockist
    Bright Bar Manufacturer Hex Bars

    Features of Hastelloy C276 round bar:

    • There is a separator between each radius of a U-Bend tube.
    • Plastic strips are used to strap bundles together.
    • To protect against extreme weather, every bundle is covered with plastic.
    • Plastic caps protect the ends of Hastelloy C276 round bars.

    Benefits of Hastelloy C276 Bar

    • Alloy C276 bars with precision tolerances
    • Tolerance for close lengths
    • Hollow Hastelloy C276 bars that have been precision straightened
    • Hastelloy C276 Bright Bar with Mirror Finish
    • The packaging of Hastelloy C276 bars is unique
    • SCADA-controlled heat treatment
    • Round bars, hex bars, and square bars are available
    • All major international specifications are met by Nickel C276 Bar
    • Rotating Probe, Ultrasonic / Magnetic Particle Eddy Current testing

    Hastelloy Alloy C276 Bars Equivalent Grades

    STANDARD

    WERKSTOFF NR.

    UNS

    GOST

    AFNOR

    JIS

    OR

    EN

    Hastelloy C276

    2.4819

    N10276

    ХН65МВУ

    NW 0276

    ЭП760

    NiMo16Cr15W

    C276 Hastelloy Alloy Round Bar Condition

    H&T

    Hardened and tempered.

    ANN

    Annealed

    PH

    Precipitation hardened.

     

    C276 Hastelloy Round Bar Length

    • Standard length is 9 – 12 metres in the metric system
    • 40 feet in the USA

    Hastelloy C276 Round Bar Weights

    Round Bar

    Size

    Kgs / Foot

    Kgs / Mtr

    Size

    Kgs / Foot

    Kgs / Mtr

    Size

    Kgs / Foot

    Kgs / Mtr

    3mm

    0.017

    0.055

    20mm

    0.753

    2.470

    3″

    10.900

    35.762

    1/8″

    0.019

    0.062

    22mm

    0.908

    2.979

    3-1/4″

    12.800

    41.996

    5/32″

    0.029

    0.095

    7/8″

    0.926

    3.038

    3-1/2″

    14.850

    48.772

    4mm

    0.030

    0.098

    24mm

    1.080

    3.543

    3-3/4″

    17.001

    55.780

    3/16″

    0.043

    0.141

    25mm

    1.180

    3.871

    4″

    19.306

    63.340

    5mm

    0.047

    0.154

    1″

    1.210

    3.970

    4-1/4″

    21.908

    72.249

    7/32″

    0.058

    0.190

    26mm

    1.271

    4.170

    4-1/2″

    24.4487

    80.340

    6mm

    0.068

    0.223

    27mm

    1.368

    4.490

    4-3/4″

    27.366

    90.249

    1/4″

    0.076

    0.249

    1-1/8″

    1.534

    5.033

    5″

    30.461

    99.940

    7mm

    0.091

    0.298

    30mm

    1.691

    5.548

    5-1/2″

    36.690

    121.000

    5/16″

    0.118

    0.387

    1-1/4″

    1.924

    6.349

    6″

    43.860

    143.900

    8mm

    0.120

    0.398

    32mm

    1.894

    6.314

    6-1/2″

    51.093

    167.630

    9mm

    0.152

    0.498

    1-3/8″

    2.303

    7.550

    7″

    59.432

    196.000

    3/8″

    0.170

    0.557

    35mm

    2.390

    7.553

    7-1/2″

    68.226

    225.000

    10mm

    0.189

    0.620

    36mm

    2.438

    7.999

    8″

    77.586

    254.55

    11mm

    0.228

    0.748

    38mm

    2.792

    8.903

    10″

    121.048

    397.140

    7/16″

    0.232

    0.761

    1-1/2″

    2.715

    8.951

     

     

     

    12mm

    0.271

    0.889

    40mm

    3.009

    9.872

     

     

     

    1/2″

    0.303

    0.994

    1-5/8″

    3.200

    10.449

     

     

     

    13mm

    0.318

    1.043

    1-3/4″

    3.712

    12.179

     

     

     

    14mm

    0.368

    1.207

    45mm

    3.807

    12.555

     

     

     

    9/16″

    0.383

    1.256

    1-7/8″

    4.260

    13.977

     

     

     

    15mm

    0.424

    1.391

    48mm

    4.330

    14.205

     

     

     

    5/8″

    0.473

    1.551

    50mm

    4.698

    15.414

     

     

     

    16mm

    0.481

    1.578

    2″

    4.848

    15.906

     

     

     

    17mm

    0.543

    1.791

    2-1/8″

    5.475

    17.963

     

     

     

    11/16″

    0.573

    1.880

    2-1/4″

    6.135

    20.128

     

     

     

    18mm

    0.610

    2.001

    60mm

    6.768

    22.205

     

     

     

    3/4″

    0.682

    2.237

    2-3/8″

    6.838

    22.435

     

     

     

     

     

     

    2-1/2″

    7.576

    24.856

     

     

     

     

     

     

    2-5/8″

    8.354

    27.409

     

     

     

     

     

     

    2-3/4″

    9.169

    30.083

     

    Size & Dimensions of Hastelloy C276 round bar

    Metric

    US Bar

    ASTM/ Canadian

    Japanese

    Bar Size

    Diam. (mm)

    Bar Size

    Diam. (Inch)

    Bar Size

    Diam. (mm2)

    Bar Size

    Diam. (mm)

    5

    5

    #2

    0.250

    10M

    100

    6

    6

    5.5

    5.5

    #3

    0.375

    15M

    200

    10

    10

    6

    6

    #4

    0.500

    20M

    300

    13

    13

    7

    7

    #5

    0.625

    25M

    500

    16

    16

    8

    8

    #6

    0.750

    30M

    700

    19

    19

    9

    9

    #7

    0.875

    35M

    1000

    22

    22

    10

    10

    #8

    1.000

    45M

    1500

    25

    25

    11

    11

    #9

    1.125

    55M

    2500

    29

    29

    12

    12

    #10

    1.250

     

     

    32

    32

    14

    14

    #11

    1.375

     

     

    35

    35

    16

    16

    #12

    1.500

     

     

    38

    38

    18

    18

    #13

    1.625

     

     

    41

    41

    20

    20

    #14

    1.750

     

     

    44

    44

    22

    22

    #15

    1.875

     

     

    48

    48

    25

    25

    #16

    2.000

     

     

    51

    51

    28

    28

    #18

    2.250

     

     

    57

    57

    32

    32

     

     

     

     

     

     

    36

    36

     

     

     

     

     

     

    40

    40

     

     

     

     

     

     

    44

    44

     

     

     

     

     

     

    50

    50

     

     

     

     

     

     

    Hastelloy C276 round bar suppliers offer a variety of shapes, including round bars, square bars, hexagonal bars, flat bars, channels, hollow bars, and more.

    Type

    SIZES (mm)

    SIZES (Inches)

    ISO Tolerance

    Hastelloy UNS N10276 Cold Drawn and Polish Round Bar

    3.00 – 75.00

    1/8″ – 3.00″

    h8-h9-h10-h11

    Alloy C276 Cold Drawn and Ground Bar

    10.00 – 75.00

    5/6″ – 2.50″

    h8-h9-h10-h11

    C276 Hastelloy Peeled and Polished Round Bar

    40.00 – 150.00

    1.50″ – 6.00″

    h11, h11-DIN 1013

    Hastelloy Alloy C276 Peeled and Ground Bar

    20.00 – 50.00

    3/4″ – 2.00″

    h9-h10-h11

    Bars of Hastelloy UNS N10276 are available in standard lengths of 2000 mm up to 6000 mm. They can also be cut to size on request (tolerance +2/-0 mm).

    Hastelloy C276 Round Bar Surface finish

    CD

    Cold drawn

    P

    Polished

    BD

    Bright drawn

    SRE

    Slit rolled edge

    CG

    Centreless ground

    HF

    Hot finished

    CF

    Cold finished

    HRAP

    Hot rolled annealed and pickled

    P&T

    Peeled and turned

    RT

    Rough turned/peeled

    ST

    Smooth turned

    PR

    Peeled and reeled

    Price Of Hastelloy C276 Round Bar

    • US / Metric Tons of Hastelloy C276 Hot Rolled Round Bars (FOB Price) available upon request
    • Alloy C276 Rods (FOB Price)
    • US / Metric Ton Hastelloy C276 Bars (FOB Price upon request) ASTM B574 Hastelloy C276 Bars
    • On request, Hastelloy C276 Square Bars (FOB Price)
    • Hex bar Hastelloy C276 US / Ton (FOB Price)
    • Hastelloy C276 Round Bars with Cold Finish US/Ton (FOB Price)

     

    Application Industries

    • Construction
    • Bridges
    • Petrochemical Industry
    • Ship Building
    • Engineering
    • General Structural Purposes
    • Offshore and Onshore Services

     

    About Hastelloy C276 Round Bar

    It is known that Troinxalloys.com offers the best quality Hastelloy C276 Bars along with all the test certificates and quality assurances. It is possible for you to order the bars in a variety of grades, tolerances, and finishes as per your convenience and needs. All materials go through rigorous quality checks before they are supplied by Michlin Metals Inc.

    What is Alloy C276 Bar

     Among the largest exporters and manufacturers of steel and alloy bars in the world is Troinxalloys.com & alloys. By far, this company has proved its worth for their clients and offers their services based on various quality and quantity criteria. This company provides a wide range of Hastelloy C276 Bars to its clients. As per the clients’ specifications, the company offers these bars in different sizes and shapes. We promise to deliver high quality Hastelloy C276 Bars that are manufactured using top quality Hastelloy alloy. The bars are offered to the global buyers at reasonable rates so buying in large quantities becomes easy.

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us