Twitter

Facebook

Instagram

317L Round Bar

 Inconel 718 Seamless Pipe 

Table of Content

Accept all small/ Large Orders of Seamless Tube Inconel 718 Ams 5589, ASTM B163 Inconel 718 seamless tubing, Inconel 718 tubing suppliers, alloy 718 Welded Tube manufacturers in India

Buy Certified & Tested alloy 718 tubings used for gas turbines, and aerospace applications, Super Price Manufacturer of Inconel Alloy 718 Tube, 718 Inconel Sanitary Tube, check Inconel 718 Cold Rolled Coiled Tube Price in India

    Inconel 718 tubing is used in gas turbines, also known as combustion turbines, which are powered by internal combustion engines.

    An important obstacle in the construction of a turbine is selecting a material that resists creep. In addition to offering good tensile, fatigue, creep, and rupture strengths, Inconel 718 is also an ideal metal for this application. As a result of both high temperatures and high stress, these turbines experience creep. As Inconel 718 is a high-strength alloy, the UNS N07718 tube can withstand temperatures up to 1300°F.

    The nickel-based seamless tube, AMS 5590 Alloy 718, does not disappoint our clients with its efficient performance. AMS 5590 has been specified by SAE as a solution annealed alloy. Inconel 718 pipe is annealed at 1950°F and cooled rapidly in water afterward. 

    As these tubes are precipitation hardened for about 10 hours at 1400°F, the Inconel 718 tubes are furnace cooled to 1200°F. Aging then takes place at the same temperature for 20 hours.

    In addition to having good oxidation resistance up to 1800°F, AMS 5589 Alloy 718 seamless tubing is suitable for fluid lines and components that are subject to stress rupture up to 1300°F.

     

    Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

    Standards And Specifications Of Inconel 718 Tubing

     

    ASME and ASTM designation

    ASTM B163/ ASME SB 163

     

    Inventory Size Ranges

    15″ to 150″NB Inch
    Dimension Table ASME, ASTM, and API
    Size table of Seamless Pipes

    Wall Thickness: 0.5mm to 20mm

    Size: 4mm to 219mm

    Size range of Welded Pipes 5.0 to 1219.2 mm
    EFW Pipes Available Size 5.0 to 1219.2 mm
    Popular For Inconel 718 Large Diameter Pipe
    Pipe Schedule as per ASME B36.10M or B36.19M SCH160 STD, SCH10, SCH40, SCH80, SCH5,
    List of pipe types Welded / ERW / Seamless / LSAW/ Fabricated Pipes
    Most Common Pipe Form Hydraulic, Round Form Etc
    Pipe length type Double Random, Cut Length & Single Random
    Pipe End Type Abbreviations Beveled End, Plain End, Theaded

    Chemical Resistance Guide Of Werkstoff Nr.2.4668 Tubing

    Grade C Mn Si S Cu Fe Ni Cr
    718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max 50.00 – 55.00 17.00 – 21.00

     Astm B163 Alloy 718 Tubing Mechanical Properties

    Grade Elongation   Density Tensile Strength Melting Point   Strength of Yield (0.2%Offset)
    718 45 %   8.2 g/cm3 Psi – 1,35,000 , MPa – 930 1350 °C (2460 °F)   Psi – 75,000 , MPa – 482

     Alloy 718 Tube Physical Properties

    Solution Treated Solution Treated and Aged
    Density 0.296 lb/in3 (8.192 g/cm3) 0.297 lb/in3 (8.22 g/cm3)
    Specific Gravity 8.19 8.22
    Melting Range 2500-2600°F 1370-1430°C

     Equivalent Material Of Uns No7718 Tubing

    Grade Elongation   Density Tensile Strength Melting Point   Strength of Yield (0.2%Offset)
    718 45 %   8.2 g/cm3 Psi – 1,35,000 , MPa – 930 1350 °C (2460 °F)   Psi – 75,000 , MPa – 482

    Size Table Of Alloy 718 Seamless Pipe

    Alloy718 Seamless Pipe

    Size:15″ to 150″NB Inch

    Wall Thickness: 0.5 to 20mm 

    Why Alloy 718 Tubes Used For Aerospace Components And Oilfield Applications?

    The alloy 718 is a nickel-chromium alloy that could be precipitation hardened. It has very high creep rupture strengths at elevated temperatures of about 700 degrees Celsius. It is a high-strength alloy with high corrosion resistance properties. In addition to hardening, it could also be readily fabricated. It has a minimum tensile strength of 1100MPa and minimum yield strength of 980MPa which are both very high values. So the material is suitable to operate in cryogenic applications, aviation and aerospace, and other high-temperature services. Since oilfield applications can encounter highly corrosive content and high temperatures, alloy 718 is used in aerospace components and in oilfield applications.

     

    Inconel 718 Tube Stock

    Nickel Alloy 718 Electropolished Tubing ASME SB 163 Inconel 718 Dom Tube
    Inconel Alloy 718 Hydraulic Tubing ASTM B163 Inconel 718 Condenser Tubing
    2.4668 Alloy 718 ERW Tubing Cold Drawn Inconel 718 Seamless Tube
    ASME SB 163 UNS N07718 Inconel Round Tubing 718 Inconel Finned Tubes
    Inconel 718 Square Tubes Inconel 718 Alloy Hollow Tubes
    Inconel 718 Seamless Tubes UNS N07718 Inconel 718 Coil Tubing
    Inconel 718 UNS N07718 Instrument Tubing ASTM B163 Alloy 718 Polish Tubing
    2.4668 Inconel 718 Welded Tubing Thin Wall Inconel 718 Din 2.4668 Tubing
    ASTM B163 Inconel 718 Square Tubing Nickel Alloy 718 Sanitary Tube
    Alloy 718 High Pressure Tubing ASME SB 163 UNS N07718 Inconel Elliptical and Oval Tube
    ASTM B163 UNS N07718 Inconel Small Diameter Tubing 12mm 2.4668 Alloy 718 Tubes
    ASTM B163 Alloy 718 Rectangular Tubing 718 Inconel Electropolish Tubes
    UNS N07718 Inconel 718 Capillary Tubes Inconel 718 UNS N07718 Heat exchanger Tube
    Inconel 718 Din 2.4668 Exhaust Tubing 1 inch ASTM B163 UNS N07718 Inconel Tube
    ASME SB 163 Inconel 718 EFW Tubing 2.4668 Inconel 718 Triangle Tubing
    Inconel 718 Alloy Gas Tubes Inconel Alloy 718 Coiled Tubing
    718 Inconel Round Tubes Re Drawn UNS N07718 Inconel 718 Tube
    Inconel 718 Alloy ERW Tubes High Pressure 2.4668 Inconel 718 Tubing
    Alloy 718 Tube Bends Inconel Alloy 718 Instrumentation Tubing

     Ams 5589 Tube Gauge Thickness

    GAUGE THICKNESS RANGE (INCH) TYPICAL VALUE (INCH)
    22 0.025 – 0.029 0.028
    20 0.031 – 0.035 0.035
    19 0.038 – 0.042 0.042
    18 0.044 – 0.049 0.049
    17 0.053 – 0.058 0.058
    16 0.060 – 0.065 0.065
    15 0.066 – 0.074 0.072
    14 0.075 – 0.085 0.083
    13 0.087 – 0.097 0.095
    12 0.101 – 0.111 0.109
    11 0.112 – 0.122 0.12
    10 0.126 – 0.136 0.134
    9 0.140 – 0.150 0.148
    8 0.157 – 0.167 0.165
    7 0.175 – 0.185 0.18

     

    Alloy 718 Nickel Tubing Price

    Description Price Per Unit (INR) Price Per USD
    Inconel Alloy 718 Seamless Tubes As Per Ams 5589 (8 Mm Od X 0.5 Mm Wt X Length 5000 Mm) (10 Pcs/50 Meter) 127,133 1703.45
    Inconel Alloy 718 Seamless Tubes As Per Ams 5589 (6mm Od X 1 Mm Wt X Length 5000 Mm) (10 Pcs/50 Meter) 107,841 1444.96
    Inconel Alloy 718 Seamless Tubes As Per Ams 5589 (8 Mm Od X 1 Mm Wt X Length 5000 Mm) (10 Pcs/50 Meter) 99,693 1335.78
    Inconel 718 Tubing (Approx 3 Lengths ) 3,192 42.77

     Inconel 718 Seamless Tube Dimensions

    Wall Sizes ( O.D.)
    .010 1/16″ , 1/8″ , 3/16″
    .020 1/16″ , 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″
    .012 1/8″
    .016 1/8″ , 3/16″
    .028 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″ , 1/2″ , 3/4″ , 1″ , 1 1/2″ , 2″
    .035 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″ , 7/16″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 2″ , 2 1/4″
    .049 3/16″ , 1/4″ , 5/16″ , 3/8″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/8″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 2″ , 2 1/4″
    .065 1/4″ , 5/16″ , 3/8″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 1 3/4″ , 2″ , 2 1/2″ , 3″
    .083 1/4″ , 3/8″ , 1/2″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 1 7/8″ , 2″ , 2 1/2″ ,3″
    .095 1/2″ , 5/8″ , 1″ , 1 1/4″ , 1 1/2″ , 2″
    .109 1/2″ , 3/4″ , 1″ , 1 1/4″ , 1 1/2″ , 2″
    .120 1/2″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 2″ , 2 1/4″ , 2 1/2″ , 3″
    .125 3/4″ , 1″ , 1 1/4″ , 1 1/2″ , 2″ , 3″ , 3 1/4″
    .134 1″
    .250 3″
    .375 3 1/2″

     Alloy 718 Seamless Tubing Wall Thickness

    Types of Inconel 718 Tube Out diameter (OD) Wall thickness Length
    NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Up to 6 Meters
    Inconel 718 Seamless Tube (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Up to 6 Meters
    Inconel 718 Welded Tube (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Up to 6 Meters

     Uns No7718 Tube Surface Coating

    • Curran 1000 T Hybrid Epoxy
    • Thin Film Engineered Polymer Coatings
    • Epoxy coating
    • Novolac Epoxy
    • Phenol Epoxy
    • High Functionality Epoxy – Curran Coating
    • Curran 1000T
    • Sakaphen- Shell and tube heat exchanger lining
    • Curralon ®

     Din 2.4668 Capillary Tube Chart

    Gauge Outside Diameter Tolerance mm Regular Wall (RW) mm Thin Wall (TW) mm Extra Thin Wall (XTW) mm Ultra Thin Wall (UTW) mm
    30 0.304 – 0.317 0.064 – 0.089
    29 o.330 – 0.342 0.064 – 0.089
    28 0.355 – 0.368 0.076 – 0.102
    27 0.406 – 0.419 0.089 – 0.115 0.064 – 0.089
    26 0.457 – 0.469 0.089 – 0.114
    25 0.508 – 0.520 0.115 – 0.140 0.089 – 0.114
    24 0.558 – 0.571 0.114 – 0.140 0.089 – 0.114 0.051 – 0.102
    23 0.635 – 0.647 0.140 – 0.165 0.089 – 0.114 0.051 – 0.102
    22 0.711 – 0.723 0.140 – 0.165 0.096 – 0.121 0.077 – 0.102 0.051 – 0.102
    21 0.812 – 0.825 0.140 – 0.165 0.102 – 0.127 0.051 – 0.102
    20 0.901 – 0.914 0.108 – 0.165 0.108 – 0.134
    19 1.054 – 1.079 0.166 – 0.216 0.102 – 0.140 0.070 – 0.108
    18 1.257 – 1.282 0.191 – 0.241 0.127 – 0.165 0.083 – 0.121 0.051 – 0.102
    17 1.460 – 1.485 0.177 – 0.229 0.115 – 0.152 0.083 – 0.127 0.057 – 0.102
    16 1.638 – 1.663 0.204 – 0.254 0.127 – 0.165 0.096 – 0.133 0.070 – 0.121
    15 1.816 – 1.841 0.204 – 0.254 0.127 – 0.165 0.096 – 0.134 0.070 – 0.121
    14 2.082 – 2.133 0.216 – 0.292 0.165 – 0.229 0.114 – 0.165 0.076 – 0.134
    13 2.387 – 2.438 0.267 – 0.343 0.191 – 0.267
    12 2.743 – 2.749 0.267 – 0.321
    11 3.023 – 3.073 0.293 – 0.368 0.216 – 0.292
    10 3.378 – 3.429 0.318 – 0.394 0.216 – 0.292

    Where To Use Inconel 718 Tubes?

    • Liquid-fueled rocket motors and components
    • Down hole shafting and strength bolting
    • Jet engines
    • Hot extrusion tooling
    • Nuclear fuel element spacers
    • Fasteners and instrumentation parts
    • Cryogenic storage tanks
    • Gas turbine components

    Alloy 718 Tubing Pressure Rating

    Tube O.D.

    (in.)

    Wall Thickness of Tube (inches)
    .028 .035 .049 .065 .083 .095 .109 .120
    Working Pressure (psig)
    1/8 7900 10100
    1/4 3700 4800 7000 9500
    5/16 3700 5400 7300
    3/8 3100 4400 6100
    1/2 2300 3200 4400
    3/4 2200 3000 4000 4600
    1 2200 2900 3400 3900 4300

     Nickel Alloy 718 Tubing Temperature Ratings

    from cryogenic up to 1400°F

     Inconel 718 Tube For Sale

    • Alloy 718 Decorative Tube
    • inconel 718 Instrumentation Tube
    • UNS N07718 Decorative Tubes
    • 718 Alloy Welded Tube
    • inconel 718 Decorative Tube
    • Inconel UNS N07718 Welded Tube
    • Alloy 718 Heat Exchager Tube
    • ASME SB516 718 Inconel Decorative Tubes
    • 718 Inconel Decorative Tubes
    • 718 Alloy Instrumentation Tube
    • ASTM B516 718 Inconel Welded Tubes
    • 718 Alloy Decorative Tube
    • Alloy 718 Instrumentation Tube
    • ASME SB516 718 Inconel Round Tubes
    • ASME SB163 718 Inconel Seamless Tube
    • UNS N07718 Round Tubes
    • WERKSTOFF NR. 2.4668 Seamless Tubes
    • 718 Alloy Heat Exchager Tube
    • Inconel Alloy 718 Seamless Tubes
    • 718 Inconel Polish Tubes
    • 718 Inconel Heat Exchager Tubes
    • UNS N07718 Seamless Tube
    • 718 Alloy Seamless Tube
    • Alloy 718 Polish Tube
    • 718 Inconel Alloy Round Tubes
    • Alloy 718 Round Tube

     Inconel 718 Melting Point

    Solution Treated Solution Treated and Aged
    Density 0.296 lb/in3 (8.192 g/cm3) 0.297 lb/in3 (8.22 g/cm3)
    Specific Gravity 8.19 8.22
    Melting Range 2500-2600°F 1370-1430°C

     Inconel 718 Alloy Tubing Test Method

    • Destructive Test Report
    • Non Destructive Test Reports
    • PMI Test Reports
    • Heat Treatment Charts
    • Third-Party Inspection for Inconel 718 Tubing
    • Raw Materials Certificate
    • Mill Test Certificates with all Inconel 718 Tube
    • 100% inspection according to NACE standards
    • HS Code Commercial Invoice
    • NABL Approved Lab Reports
    • Mechanical Report

    Alloy 718 Annealed Tube Weight Per Cubic Inch

    DIMENSIONS WALL WEIGHT PER DIMENSIONS WALL WEIGHT PER
    (MM) (MM) METRE (KG) (MM) (MM) METRE (KG)
    12.7 x 12.7 1.20 0.44 40 x40 1.20 1.49
    12.7 x 12.7 1.50 0.55 40 x40 1.50 1.85
    15 x 15 1.20 0.53 40 x40 2.00 2.45
    15 x 15 1.50 0.65 40 x40 3.00 3.75
    20 x 20 1.20 0.71 50 x50 1.50 2.32
    20 x 20 1.50 0.88 50 x50 2.00 3.08
    20 x 20 2.00 1.19 50 x50 3.00 4.65
    25 x 25 1.20 0.92 60 x60 2.00 3.71
    25 x 25 1.50 1.14 60 x60 3.00 5.49
    25 x 25 2.00 1.49 70 x70 3.00 6.53
    25 x 25 3.00 2.20 80 x80 2.00 4.98
    30 x 30 1.20 1.10 80 x80 3.00 7.53
    30 x 30 1.50 1.37 100 x 100 2.00 6.40
    30 x 30 2.00 1.84 100 x 100 3.00 9.53
    30 x 30 3.00 2.72

    Alloy 718 Square Tube Tolerance

    • Straightness: .030″ in 3″
    • Wall Tolerance +/- 10%

    O.D. INCHES

    WALL THICKNESS INCHES

    O.D. +/- INCHES

    1/2″ to 1″ incl.

    .025 to .065

    .005

    Over .065 to .134

    .010

    1 to 1-1/2″ incl.

    .025 to .065

    .008

    Over .065 to .134

    .010

    1-1/2″ to 2″ incl.

    .025 to .049

    .010

    Over .049 to .083

    .011

    Over .083 to .148

    .012

    2″ to 2-1/2″ incl.

    .032 to .065

    .012

    Over .065 to .109

    .013

    Over .109 to .165

    .014

    2-1/2″ to 3-1/2″ incl.

    .032 to .165

    .014

    Over .165 to .220

    .020

    3-1/2″ to 5″ incl.

    .083 to .165

    .020

    Over .165 to .220

    .025

     Inconel 718 Seamless Pipe Application Industries

    • Pharmaceuticals
    • Heat Exchangers
    • Power Generation
    • Pulp and Paper Industry
    • Petrochemicals
    • Chemical Equipment
    • Gas Processing
    • Off-Shore Oil Drilling Companies
    • Specialty Chemicals
    • Pharmaceutical Equipment
    • Sea Water Equipment
    • Condensers

     

    Distrubution Network 

    Our Products

    Follow Us On

    Contact Us