Round 410 stainless steel bars
Table of Content
Suppliers and Dealers of Stainless Steel 410 Bars, ASTM A276 Stainless Steel 410 Round Bars, SS UNS S41000 Bright Bars, and Austenitic Stainless Steel 410 Rods in Mumbai, India.
Stainless Steel Round Bars, Suppliers of ASTM A479 Stainless Steel 410 Hex Bars, Stainless Steel 410 Forged Bars, Stainless Steel 410 Square Bars, Stainless Steel 410 Triangular Bars, Stainless Steel WERKSTOFF NR. 1.4006 Round Bars Manufacturer in India.
Tronix Alloy is one of the leading distributors and traders of SS 410 Round Bars, generally regarded as less weldable than ferritic stainless steel. By minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part slightly before forming Stainless Steel 410 Square Bars, it is possible to avoid brittle weld fractures.
A stainless steel 410 hollow bar contains at least 12 percent chromium, just enough to prevent corrosion. This can be attributed to adding Stainless Steel 410 Flat Bars to control hardening. This results in the need to achieve penetration during arc welding with higher heat inputs. A weld filler is normally applied to Stainless Steel 410 Threaded Bars by immersing them in a nitric acid solution between 10 to 20 percent, followed by a water rinse to remove residual iron.
Hexagonal bars made from stainless steel 410 have a higher carbon content for optimizing hardness and strength. The stainless steel 410 triangular bars are highly malleable in the annealed condition but can be hardened to the highest hardness grades with 12.5% chromium. Since stainless steel 410 bars are hardened, they are rarely welded. Hardening and polishing stainless steel rods achieve the best corrosion resistance.
It is a martensitic stainless steel that contains 11.5% chromium and is a type of stainless steel. In the production of valves, pumps, and turbines, for example, it is often used in applications that need high strength and good corrosion resistance, such as in the application of valves, pumps, and turbines.
If you are looking for round 410 stainless steel bars, you can find them from various metal suppliers in various sizes and lengths. It is common to find sizes such as 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, and 1″ in the market.
There are several important things to consider when buying 410 stainless steel bars, and one of them is to make sure that they meet your specific requirements in terms of dimensions, surface finish, and tolerances. To make it suitable, consider whether additional processing or finishing may be necessary for your application, such as cutting, drilling, or heat treatment.
The best way to ensure that you are selecting the right material and dimension for your specific application is to consult with a reputable metal supplier or a materials engineer to ensure that you are selecting the right material.
What is Stainless Steel 410 Bar
Our goal at Tronix Alloy is to always provide the best quality bars to our clients. As a result, they have put their trust in us, which means that we make every effort to keep up their hope and win their hearts with the help of our hard-working, professional team, who manufactures the best quality products available. We also make this type of bar, and we specialize in making this martensitic grade steel which contains chromium and is a type of stainless steel with high corrosion resistance. In addition to being wear-resistant, they are also corrosion-resistant. The stainless steel 410 bar is also corrosion-resistant due to some chemicals, water, air, food, mild acids, and some chemicals. It has also demonstrated adequate resistance to concentrated sulfuric acid, nitric acid, and acetic and nitric acid dilutions. When this Stainless Steel 410 Bar is hardened and tempered, they show high mechanical properties and corrosion resistance when they are hardened and tempered.
Types of Stainless Steel 410 Bars / Rods
|
Stainless Steel 410 Bright Bar |
|
Stainless Steel 410 Hex Bar |
|
Stainless Steel 410 Square Bar |
|
Stainless Steel 410 Rectangular Bar |
|
Stainless Steel 410 Flat Bars |
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.
STAINLESS STEEL ROD 410 SPECIFICATIONS
Material grade 410 stainless steel |
The 410 stainless steel round bar is made of stainless steel |
Standard 410 stainless steel |
Standards ASTM A276, ASME SA276 / Standards ASTM A479, ASME SA479. |
Dimensions of 410 square bars in stainless steel |
Standards like EN, DIN, JIS, ASTM, BS, ASME, AISI, etc. |
Size of stainless steel 410 round bars |
Dimensions: 3-~800mm |
Size of stainless steel 410 hex bars |
2 to 100mm A/F |
Size of SUS410 flat bars |
2 – 100 mm thick |
10mm to 500mm in width |
|
Size of stainless steel 410 square bars |
From 4 to 100 millimeters |
Angle bars made of stainless steel 410 |
3/20/20/2/12/12/12/12/12mm*100mm*100mm |
Sections of SUS410 Rectangular Bars |
Thicknesses ranging from 3mm to 12mm |
410 stainless steel channel bar |
Sections ranging from 80 x 40mm to 150 x 75mm; thicknesses from 5.0 to 6.0mm |
Hollow bar ASTM A276 Type 410 |
From 32mm OD x 16mm ID up to 250mm OD x 200mm ID) |
Billet size for stainless steel 410 threaded bars |
Diameters from 1/2 to 495mm |
Size of stainless steel rectangles 410 |
A 33 x 30mm sheet to a 295 x 1066mm sheet |
410 Stainless Steel Black Bar Standard Dimensions |
Height / Diameter: |
Steel Hex Bars AISI 410 Finish ASTM A276 |
Rough Turned, Bright, Centreless Ground & Black, Cold (Bright) Drawn, Centerless Ground, Hot Rolled, Smooth Turned, Peeled, Polished, Grinned, Slit Rolled Edge, Hot Rolled Annealed, BRIGHTS, BRIGHTS, COMBINED, CENTRELESS GROUND & BLACK |
Hollow bars tolerances ASTMA276 Type 410 |
Depending on client needs, H8, H9, H10, H11, H12, H13K9, K10, K11, K12 |
410 Cold Rolled Bar Technique as per ASTM A276 |
Hot Rolled, Cold Drawn, Cold Rolled, Forged 410 Stainless Steel Round Bars & Rods |
T-Bar Surface SUS410 |
Hot Rolled Pickled, Cold Drawn, Sand Blasted Finished, Polished, Hairline |
Condition of Rolled Stainless Steel 410 Flat Bars |
Tempered & hardened, annealed |
Processing of SS 410 rods |
650mm bar cutting |
The 410 stainless steel round bar form is available in a variety of sizes |
Rod, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Round Rod, Blocks, Triangle, Rectangle, Half Round Bar, Hex (A/F), Threaded, Profiles, Rings, Hollow, Billet, Ingot, I/H Bar, Forgings, etc. |
410 stainless steel round bars conform to NACE MR0175 and ISO 15156 |
STAINLESS STEEL ROUND BAR CHEMICAL COMPOSITION 410
Due to the low price of stainless steel 410 round bars, check the chemical composition in the table.
Grade |
Iron |
Chromium |
Nickel |
Manganese |
Silicon |
Carbon |
Phosphorous |
Sulfur |
Content (%) |
61 |
19 |
13 |
3.5 |
2 |
1 |
0.045 |
0.030 |
MECHANICAL PROPERTIES OF 410 STAINLESS STEEL BARS
410 SS True Bar & 410 SS Hex Bar properties are shown in the below table.
Properties |
Tensile Strength |
Yield Strength (@ Strain 0.200%) |
Elastic Modulus |
Poisson’s Ratio |
Elongation At Break (In 50 Mm) |
Hardness, Rockwell B |
Metric |
620 MPa |
275 MPa |
193 GPA |
0.27-0.30 |
45% |
85 |
410 Stainless Steel Round Bar Equivalent Grades
AISI 410 Equivalent Indian Standard is available from us in a wide variety
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
SS 410 |
1.4006 |
S41000 |
SUS 410 |
410S21 |
12Kh13 |
Z 10 C 13/Z 12 C 13 S |
FeMi35Cr20Cu4Mo2 |
Physical properties of 410 stainless steel round bars
DENSITY (G/CM 3) | 8.0 |
DENSITY (LB/IN 3) | 0.289 |
MELTING POINT (°C) | 1400 – 1455 |
MELTING POINT (°F) | 2550 – 2650 |
Condition of ASTM A276 AISI 410 Bright Bars
H&T |
In a hardened and tempered state. |
ANN |
Anodized |
PH |
Hardened precipitation. |
Surface finish of SS 410 square bars
CD |
Cold drawn |
P |
Polished |
BD |
Bright drawn |
SRE |
Slit rolled edge |
CF |
Cold finished |
HRAP |
Hot rolled, annealed, and pickled |
P&T |
Peeled and turned |
RT |
Rough-turned/peeled |
CG |
Centreless ground |
HF |
Hot finished |
ST |
Smooth turned |
PR |
Peeled and reeled |
STAINLESS STEEL ROUND BARS IN 410 SIZES
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6 – 2.50 | h8-h9-h10-h11 |
Cold Drawn and Polish | 3.00 – 75.00 | 1/8 – 3.00 | h8-h9-h10-h11 |
Peeled and Ground | 20.00 – 50.00 | 3/4 – 2.00 | h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50 – 6.00 | h11, h11-DIN 1013 |
410 Stainless Steel Bars are available in standard lengths of 2000 mm to 6000 mm. On request, cut to size (tolerance +2/-0 mm).
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
-
- Hex rod made of stainless steel SW 13 410
- Hex rod made of stainless steel 17 410
- Hex rod made of stainless steel SW 19 410
- Hex rod made of stainless steel SW 24 410
- Hex rod made of stainless steel SW 27 410
Our 410 SS Hex Bar suppliers offer a variety of shapes, such as Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Channels, and Hollow Bars.
SIZES OF STAINLESS STEEL 410 FLAT BARS
Stainless steel 410 flat bar sizes in mm | Stainless steel 410 Flat Bar Size (inch) | Stainless steel 410 Flat Bar Thickness (mm) | Stainless steel 410 Flat Bar Thickness (in Inches) |
22 | 7/8 | 17 & 18 | 2/3 – 5/7 |
25 | 1 | 5 to 20 | 3/16 – 4/5 |
30 | 1-3/16 | 5 to 20 | 3/16 – 4/5 |
32 | 1-1/4 | 6 to 20 | 1/4 – 4/5 |
35 | 1-3/8 | 5 to 20 | 3/16 – 3/16 |
40 | 1-4/7 | 5 to 25 | 3/16 – 1 |
45 | 1-7/9 | 5 to 25 | 3/16 – 1 |
47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
50 | 2 | 5 to 32 | 3/16 – 1-1/4 |
55 | 2-1/16 | 5 to 25 | 3/16 – 1 |
57 | 2-1/4 | 32 | 1-1/4 |
60 | 2-3/8 | 5 to 35 | 3/16 – 1-3/8 |
63 | 2-1/2 | 10 to 30 | 3/8 – 1-3/16 |
65 | 2-5/9 | 10 to 30 & 35 | 3/8 – 1-3/16, & 1-3/8 |
70 | 2-3/4 | 6 to 25 & 40 | 1/4 – 1, & 1-4/7 |
75 | 3 | 8 to 25 | 5/16 – 1 |
80 | 3-1/8 | 8 to 20 | 5/16 – 4/5 |
90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
SIZES OF STAINLESS STEEL 410 HOLLOW BARS
This table shows Indian standard hollow bar sizes, including finished part sizes. If the length is less than 2.5 times the outside diameter, the chucked true values are guaranteed to be valid.
ID = inside diameter, OD = outside diameter
Size | Chucked true to OD | Chucked true to ID | |||||||
OD, mm |
ID, mm |
Max. OD, mm |
Min. ID, mm |
Max. OD, in. |
Min. ID, in. |
Max. OD, mm |
Min. ID, mm |
Max. OD, in. |
Min. ID, in. |
32 | 20 | 31 | 21.9 | 1.220 | 0.862 | 30 | 21 | 1.185 | 0.827 |
32 | 16 | 31 | 18 | 1.220 | 0.709 | 30 | 17 | 1.181 | 0.669 |
36 | 25 | 35 | 26.9 | 1.378 | 1.059 | 34.1 | 26 | 1.343 | 1.024 |
36 | 20 | 35 | 22 | 1.378 | 0.866 | 34 | 21 | 1.339 | 0.827 |
36 | 16 | 35 | 18.1 | 1.378 | 0.713 | 33.9 | 17 | 1.335 | 0.669 |
40 | 28 | 39 | 29.9 | 1.535 | 1.177 | 38.1 | 29 | 1.500 | 1.142 |
40 | 25 | 39 | 27 | 1.535 | 1.063 | 38 | 26 | 1.496 | 1.024 |
40 | 20 | 39 | 22.1 | 1.535 | 0.870 | 37.9 | 21 | 1.492 | 0.827 |
45 | 32 | 44 | 33.9 | 1.732 | 1.335 | 43.1 | 33 | 1.697 | 1.299 |
45 | 28 | 44 | 30 | 1.732 | 1.181 | 43 | 29 | 1.693 | 1.142 |
45 | 20 | 44 | 22.2 | 1.732 | 0.874 | 42.8 | 21 | 1.685 | 0.827 |
50 | 36 | 49 | 38 | 1.929 | 1.496 | 48 | 37 | 1.890 | 1.457 |
50 | 32 | 49 | 34.1 | 1.929 | 1.343 | 47.9 | 33 | 1.886 | 1.299 |
50 | 25 | 49 | 27.2 | 1.929 | 1.071 | 47.8 | 26 | 1.882 | 1.024 |
56 | 40 | 55 | 42 | 2.165 | 1.654 | 54 | 41 | 2.126 | 1.614 |
56 | 36 | 55 | 38.1 | 2.165 | 1.500 | 53.9 | 37 | 2.122 | 1.457 |
56 | 28 | 55 | 30.3 | 2.165 | 1.193 | 53.7 | 29 | 2.114 | 1.142 |
63 | 50 | 62 | 51.9 | 2.441 | 2.043 | 61.1 | 51 | 2.406 | 2.008 |
63 | 45 | 62 | 47 | 2.441 | 1.850 | 61 | 46 | 2.402 | 1.811 |
63 | 40 | 62 | 42.2 | 2.441 | 1.661 | 60.8 | 41 | 2.394 | 1.614 |
63 | 36 | 62 | 38.3 | 2.441 | 1.508 | 60.7 | 37 | 2.390 | 1.457 |
63 | 32 | 62 | 34.4 | 2.441 | 1.354 | 60.6 | 33 | 2.386 | 1.299 |
71 | 56 | 69.9 | 58 | 2.752 | 2.283 | 68.9 | 57 | 2.713 | 2.244 |
71 | 45 | 69.9 | 47.3 | 2.752 | 1.862 | 68.6 | 46 | 2.701 | 1.811 |
71 | 40 | 69.9 | 42.4 | 2.752 | 1.669 | 68.5 | 41 | 2.697 | 1.614 |
71 | 36 | 69.9 | 38.5 | 2.752 | 1.516 | 68.4 | 37 | 2.693 | 1.457 |
75 | 60 | 73.8 | 62 | 2.906 | 2.441 | 72.8 | 61 | 2.866 | 2.402 |
75 | 50 | 73.8 | 52.2 | 2.906 | 2.055 | 72.6 | 51 | 2.858 | 2.008 |
75 | 40 | 73.8 | 42.5 | 2.906 | 1.673 | 72.3 | 41 | 2.846 | 1.614 |
80 | 63 | 78.8 | 65 | 3.102 | 2.559 | 77.8 | 64 | 3.063 | 2.520 |
80 | 50 | 78.8 | 52.4 | 3.102 | 2.053 | 77.4 | 51 | 3.047 | 2.008 |
80 | 45 | 78.8 | 47.5 | 3.102 | 1.870 | 77.3 | 46 | 3.043 | 1.811 |
80 | 40 | 78.8 | 42.6 | 3.102 | 1.677 | 77.2 | 41 | 3.039 | 1.614 |
85 | 67 | 83.7 | 69.1 | 3.295 | 2.720 | 82.6 | 68 | 3.252 | 2.677 |
85 | 55 | 83.7 | 57.4 | 3.295 | 2.260 | 82.3 | 56.0 | 3.240 | 2.205 |
85 | 45 | 83.7 | 47.6 | 3.295 | 1.874 | 82.1 | 46.0 | 3.232 | 1.811 |
90 | 71 | 88.6 | 73.1 | 3.488 | 2.878 | 87.6 | 72.1 | 3.449 | 2.839 |
90 | 63 | 88.6 | 65.3 | 3.488 | 2.571 | 87.3 | 64.0 | 3.437 | 2.520 |
90 | 56 | 88.6 | 58.5 | 3.488 | 2.303 | 87.1 | 57.0 | 3.429 | 2.244 |
90 | 50 | 88.6 | 52.6 | 3.488 | 2.071 | 87.0 | 51.0 | 3.425 | 2.008 |
95 | 75 | 93.5 | 77.3 | 3.681 | 3.041 | 92.4 | 76.2 | 3.641 | 2.997 |
95 | 67 | 93.5 | 69.3 | 3.681 | 2.728 | 92.2 | 68.0 | 3.630 | 2.677 |
95 | 50 | 93.5 | 52.7 | 3.681 | 2.075 | 91.8 | 51.0 | 3.614 | 2.008 |
100 | 80 | 98.5 | 82.3 | 3.878 | 3.240 | 97.4 | 81.2 | 3.835 | 3.197 |
100 | 71 | 98.5 | 73.4 | 3.878 | 2.890 | 97.2 | 72.1 | 3.827 | 2.839 |
100 | 63 | 98.5 | 65.5 | 3.878 | 2.579 | 97.0 | 64.0 | 3.819 | 2.520 |
100 | 56 | 98.5 | 58.7 | 3.878 | 2.311 | 96.8 | 57.0 | 3.811 | 2.244 |
106 | 80 | 104.4 | 82.5 | 4.110 | 3.248 | 103.1 | 81.2 | 4.059 | 3.197 |
106 | 71 | 104.4 | 73.5 | 4.110 | 2.894 | 103.0 | 72.1 | 4.055 | 2.839 |
106 | 63 | 104.4 | 65.7 | 4.110 | 2.587 | 102.7 | 64.0 | 4.043 | 2.520 |
106 | 56 | 104.4 | 58.9 | 4.110 | 2.319 | 102.5 | 57.0 | 4.035 | 2.244 |
112 | 90 | 110.3 | 92.5 | 4.343 | 3.642 | 109.2 | 91.4 | 4.299 | 3.598 |
112 | 80 | 110.3 | 82.6 | 4.343 | 3.252 | 108.9 | 81.2 | 4.287 | 3.197 |
112 | 71 | 110.3 | 73.7 | 4.343 | 2.902 | 108.7 | 72.1 | 4.280 | 2.839 |
112 | 63 | 110.3 | 65.8 | 4.343 | 2.591 | 108.5 | 64.0 | 4.272 | 2.520 |
118 | 90 | 116.2 | 92.7 | 4.575 | 3.650 | 114.9 | 91.4 | 4.524 | 3.598 |
118 | 80 | 116.2 | 82.8 | 4.575 | 3.260 | 114.6 | 81.2 | 4.512 | 3.197 |
118 | 71 | 116.2 | 73.8 | 4.575 | 2.906 | 114.5 | 72.1 | 4.508 | 2.839 |
118 | 63 | 116.2 | 66.0 | 4.575 | 2.598 | 114.2 | 64.0 | 4.496 | 2.520 |
125 | 100 | 123.1 | 102.7 | 4.846 | 4.043 | 121.9 | 101.5 | 4.799 | 3.996 |
125 | 90 | 123.1 | 92.8 | 4.846 | 3.654 | 121.7 | 91.4 | 4.791 | 3.598 |
125 | 80 | 123.1 | 82.9 | 4.846 | 3.264 | 121.4 | 81.2 | 4.780 | 3.197 |
125 | 71 | 123.1 | 74.0 | 4.846 | 2.913 | 121.3 | 72.1 | 4.772 | 2.839 |
132 | 106 | 130.0 | 108.8 | 5.118 | 4.283 | 128.8 | 107.6 | 5.071 | 4.236 |
132 | 90 | 130.0 | 93.0 | 5.118 | 3.661 | 128.4 | 91.4 | 5.055 | 3.598 |
132 | 80 | 130.0 | 83.1 | 5.118 | 3.272 | 128.1 | 81.2 | 5.043 | 3.197 |
132 | 71 | 130.0 | 74.2 | 5.118 | 2.921 | 121.2 | 72.1 | 5.035 | 2.839 |
140 | 112 | 137.9 | 115 | 5.429 | 4.528 | 136.6 | 113.7 | 5.378 | 4.476 |
140 | 100 | 137.9 | 103.1 | 5.429 | 4.059 | 136.3 | 101.5 | 5.366 | 3.996 |
140 | 90 | 137.9 | 93.2 | 5.429 | 3.669 | 136.1 | 91.4 | 5.358 | 3.598 |
140 | 80 | 137.9 | 83.3 | 5.429 | 3.280 | 135.8 | 81.2 | 5.346 | 3.197 |
150 | 125 | 147.7 | 128.1 | 5.815 | 5.043 | 146.5 | 126.9 | 5.768 | 4.996 |
150 | 106 | 147.7 | 109.3 | 5.815 | 4.303 | 146 | 107.6 | 5.748 | 4.236 |
150 | 95 | 147.7 | 98.4 | 5.815 | 3.874 | 145.7 | 96.4 | 5.736 | 3.795 |
150 | 80 | 147.7 | 83.6 | 5.815 | 3.291 | 145.3 | 81.2 | 5.720 | 3.197 |
160 | 132 | 157.6 | 135.3 | 6.205 | 5.327 | 156.3 | 134 | 6.154 | 5.276 |
160 | 122 | 157.6 | 125.4 | 6.205 | 4.937 | 156 | 123.8 | 6.142 | 4.874 |
160 | 112 | 157.6 | 115.5 | 6.205 | 4.547 | 155.8 | 113.7 | 6.134 | 4.476 |
160 | 90 | 157.6 | 94.0 | 6.205 | 3.701 | 155.2 | 91.4 | 6.110 | 3.598 |
170 | 140 | 167.4 | 143.5 | 6.591 | 5.650 | 166 | 142.1 | 6.535 | 5.594 |
170 | 130 | 167.4 | 133.6 | 6.591 | 5.260 | 165.8 | 132 | 6.528 | 5.197 |
170 | 128 | 167.4 | 131.6 | 6.591 | 5.181 | 165.7 | 130 | 6.524 | 5.118 |
170 | 118 | 167.4 | 121.7 | 6.591 | 4.791 | 165.5 | 119.8 | 6.516 | 4.717 |
170 | 106 | 167.4 | 109.8 | 6.591 | 4.323 | 165.2 | 107.6 | 6.504 | 4.236 |
170 | 100 | 167.4 | 103.9 | 6.591 | 4.091 | 165 | 101.5 | 6.496 | 3.996 |
180 | 150 | 177.3 | 153.6 | 6.980 | 6.047 | 176 | 152.3 | 6.929 | 5.996 |
180 | 140 | 177.3 | 143.7 | 6.980 | 5.657 | 175.7 | 142.1 | 6.917 | 5.594 |
180 | 125 | 177.3 | 128.9 | 6.980 | 5.075 | 175.3 | 126.9 | 6.902 | 4.996 |
180 | 100 | 177.3 | 104.1 | 6.980 | 4.098 | 174.7 | 101.5 | 6.878 | 3.996 |
190 | 160 | 187.1 | 163.8 | 7.366 | 6.449 | 185.7 | 162.4 | 7.311 | 6.394 |
190 | 150 | 187.1 | 153.9 | 7.366 | 6.059 | 185.5 | 152.3 | 7.303 | 5.996 |
190 | 132 | 187.1 | 136 | 7.366 | 5.354 | 185.1 | 134 | 7.287 | 5.276 |
200 | 170 | 197.0 | 173.9 | 7.756 | 6.846 | 195.6 | 172.6 | 7.701 | 6.795 |
200 | 160 | 197.0 | 164 | 7.756 | 6.457 | 195.4 | 162.4 | 7.693 | 6.394 |
200 | 150 | 197.0 | 154.1 | 7.756 | 6.067 | 195.2 | 152.3 | 7.685 | 5.996 |
200 | 140 | 197.0 | 144.2 | 7.756 | 5.677 | 194.9 | 142.1 | 7.673 | 5.594 |
212 | 170 | 208.8 | 174.2 | 8.220 | 6.858 | 207.2 | 172.6 | 8.157 | 6.795 |
212 | 150 | 208.8 | 154.4 | 8.220 | 6.079 | 206.6 | 152.3 | 8.133 | 5.997 |
212 | 130 | 208.8 | 134.6 | 8.220 | 5.299 | 206.2 | 132 | 8.118 | 5.197 |
224 | 180 | 220.6 | 184.4 | 8.685 | 7.260 | 218.9 | 182.7 | 8.618 | 7.193 |
224 | 140 | 220.6 | 144.8 | 8.685 | 5.701 | 217.9 | 142.1 | 8.579 | 5.594 |
236 | 190 | 232.4 | 194.6 | 9.150 | 7.661 | 230.7 | 192.9 | 9.083 | 7.594 |
236 | 150 | 232.4 | 155.0 | 9.150 | 6.102 | 229.7 | 152.3 | 9.043 | 5.996 |
250 | 200 | 246.2 | 204.9 | 9.693 | 8.067 | 244.3 | 203.0 | 9.618 | 7.992 |
275 | 200 | 268.9 | 205.4 | 10.587 | 8.087 | 266.5 | 203.0 | 10.492 | 7.992 |
SIZES OF STAINLESS STEEL 410 HEX BARS
Size (mm) | Weight (kg/m) | Size (mm) | Weight (kg/m) | Size (mm) | Weight (kg/m) |
7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
SIZES OF 410 STAINLESS STEEL SQUARE BARS
Size (mm) | Weight per meter (Kg) | Size (mm) | Weight per meter (Kg) |
12 x 12 | 1.14 | 30×30 | 7.11 |
16 x 16 | 2.02 | 40 x 40 | 12.60 |
20 x 20 | 3.16 | 50 x 50 | 19.80 |
25 x 25 | 4.94 |
Industries that use SS 410 round bars
- Companies that drill oil off-shore
- Generation of electricity
- The petrochemical industry
- Processing of gas
- Chemicals for special applications
- The pharmaceutical industry
- Equipment for the pharmaceutical industry
- Equipment for Chemicals
- seawater equipment
- Exchangers of heat
- A condenser
- Industry of pulp and paper
Test certificates for 410 steel rods
GIC provides Manufacturer TC (Test Certificate) by EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, and Third-Party Inspection Report. We can also provide additional requirements and standard certificates like EN 10204 3.1. As per NACE MR 107. If clients request, we will provide ferrite content following the norms.
The EN 10204/3.1B standard,
Certificate of Raw Materials
The radiography test report must be 100%
Reports of third-party inspections, etc.
Value-added services for ASTM, ASME, and API SS 410 bars
Testing of materials:
Tronix Alloy ensures they undergo a strict quality test before dispatching our materials to our clients.
An example of mechanical test is the tensile testing of an area,
The Test for hardness
Analyses involving the chemical analysis and spectroscopy,
Testing for Positive Material Identification (PMI),
The flattening test
Tests at the micro and macro levels
Test for Pitting Resistance
Test for flare-ups
Tests for intergranular corrosion (IGC)
Detailed documentation
Commercial invoices with HS codes
A packing list that includes net weight and gross weight, number of boxes, marks, and numbers
Legalized/attested Certificate of Origin by Chamber of Commerce or Embassy
Certificates of fumigation
Test reports for raw materials
Traceability records for materials
The Quality Assurance Plan (QAP)
Charts for heat treatment
NACE MR0103 and NACE MR0175 Test Certificates
Material Test Certificates (MTC) according to EN 10204 3.1 and EN 10204 3.2
Letter of Guarantee
Reports of laboratory tests approved by NABL
WPS/PQR, Welding Procedure Specification/Procedure Qualification Record
The Generalized System of Preferences (GSP) Form A
Packaging for SS 410 rods
To ensure quality, we pack our Stainless Steel 410 Round Bars in environmental poly bags, and then in free fumigation wooden cases or wooden pallets. Additionally, we can accept customized packages, including OEM, by negotiation. We offer everything you need for your 410 SS Round Bar pack requirements. Packing and packaging are given a lot of attention. Packing for AISI 410 Round Bars consists of boxes foiled in plastic and bubble wrap.
SS 410 D Bar Application Industries
- Petrochemical Industry
- Oil and Gas Industry
- Chemical Industry
- Power Plant Industry
- Energy Industry
- Pharmaceuticals Industry
- Pulp & Paper Indusry
- Food Processing Industry
- Aerospace Industry
- Refining Industry